[Jun-2022] Updated Cisco 300-430 Dumps - PDF & Online Engine [Q54-Q75] : Actual Test Materials : http://blog.actualtests4sure.com

NEW QUESTION 54
For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security > Access Control Lists > CPU Access Control Lists menu. Which kind of traffic does this change apply to, as soon as the change is made?

wireless traffic only

wired traffic only

VPN traffic

wireless and wired traffic

NEW QUESTION 55
The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue’

Place the APs to monitor mode shutdown the radios, and then change Cisco Hyperlocation detection threshold

Shutdown all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.

Disable Cisco Hyperlocation. change the Cisco Hyperlocation detection threshold and then enable it

Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WL AN.

NEW QUESTION 56
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?

Option A

Option B

Option C

Option D

NEW QUESTION 57
An engineer is following the proper upgrade path to upgrade a Cisco AireOS WLC from version 7.3 to 8.9.
Which two ACLs for Cisco CWA must be configured when upgrading from the specified codes? (Choose two.)

Permit 0.0.0.0 0.0.0.0 UDP any any

Permit 0.0.0.0 0.0.0.0 any DNS any

Permit 0.0.0.0 0.0.0.0 UDP DNS any

Permit 0.0.0.0 0.0.0.0 UDP any DNS

Permit any any any

NEW QUESTION 58
A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the Trusted Root Certification Authorities store on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?

There is an IEEE invalid 802.1X authentication policy on the authentication server.

The user Active Directory account is locked out after several failed attempts.

There is an invalid 802.1X authentication policy on the authenticator.

The laptop has not received a valid IP address from the wireless controller.

NEW QUESTION 59
Which devices can be tracked with the Cisco Context Aware Services?

wired and wireless devices

wireless devices

wired devices

Cisco certified wireless devices

NEW QUESTION 60
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?

1

2

3

4

NEW QUESTION 61
Refer to the exhibit.

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)

TSPEC

SIFS

802.11e

WMM

APSD

NEW QUESTION 62
What is the difference between PIM sparse mode and PIM dense mode?

Sparse mode uses distribution trees. Dense mode floods.

Sparse mode supports multiswitch networks. Dense mode supports only one switch.

Sparse mode supports only one switch. Dense mode supports multiswitch networks.

Sparse mode floods. Dense mode uses distribution trees.

NEW QUESTION 63
On a Cisco Catalyst 9800 Series Wireless Controller, an engineer wants
to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational. Which command set prevents this connection?

config terminal
wireless profile flex [profile name]
fallback-radio-shut
end

config terminal
wireless profile flex [profile name]
ethernet-fallback-enable
end

config terminal
wireless flexconnect profile [profile name]
fallback-radio-shut
end

config terminal
wireless flexconnect profile [profile name)
ethernet-fallback-enable
end

NEW QUESTION 64
Which AP model of the Cisco Aironet Active Sensor is used with Cisco DNA Center?

1800s

3600e

3800s

4800i

NEW QUESTION 65
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?

3 hours

24 hours

3 days

7 days

NEW QUESTION 66
An engineer must implement a BYDD policy with these requirements:
* Onboarding unknown machines
* Easily scalable
* Low overhead on the wireless network Which method satisfies these requirements?

triple SSID

open SSID

dual SSID

single SSID

NEW QUESTION 67
What must be configured on the Global Configuration page of the WLC for an access point to use 802.1x to authenticate to the wired infrastructure?

supplicant credentials

RADIUS shared secret

local access point credentials

TACACS server IP address.

NEW QUESTION 68
The network management team in a large shopping center has detected numerous roque APs from local coffee shops that are broadcasting SSIDs. All of these SSlDs have names starting with ATC (for example. ATC302.
ATC011. and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature. Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.

NEW QUESTION 69
A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?

CleanAir reports on Cisco Prime Infrastructure

Performance reports on Cisco Prime Infrastructure

Interference Devices reports on Cisco Wireless LAN Controller

Air Quality reports on Cisco Wireless LAN Controller

NEW QUESTION 70
Which configured is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?

Enable IGMPv3 on the central Layer 3 switch.

Enable IGMP snooping on the WLC

Enable multicast mode on the WLC

Create multicast groups on the central Layer 3 switch.

NEW QUESTION 71
Which three characteristics of a rogue AP pose a high security risk? (Choose three.)

open authentication

high RSSI

foreign SSID

accepts clients

low RSSI

distant location

NEW QUESTION 72
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?

10 seconds

15 seconds

30 seconds

60 seconds

NEW QUESTION 73
CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available?
(Choose two.)

Allow HTTP traffic only before authentication and block all the traffic.

Allow all the traffic before authentication and intercept HTTPS only.

Allow HTTPs traffic only before authentication and block all other traffic.

Allow all the traffic before authentication and intercept HTTP only.

Allow SNMP traffic only before authentication and block all the traffic.

NEW QUESTION 74
A multitenant building contains known wireless networks in most of the suites. Rogues must be classified in the WLC. How are the competing wireless APs classified?

adhoc

friendly

malicious

unclassified

NEW QUESTION 75
A wireless network engineer must present a list of all rogue APs with a high severity score to senior management. Which report must be created in Cisco Prime Infrastructure to provide this information?

Rogue AP Events

Rogue AP Count Summary

New Rogue APs

Rogue APs

[Jun-2022] Updated Cisco 300-430 Dumps - PDF & Online Engine [Q54-Q75]

The benefit of obtaining the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam Certification