[Q11-Q30] NS0-593 Free Update With 100% Exam Passing Guarantee [2022]

Rate this post

NS0-593 Free Update With 100% Exam Passing Guarantee [2022]

[Jul-2022] Verified Network Appliance Exam Dumps with NS0-593 Exam Study Guide

Network Appliance NS0-593 Exam Syllabus Topics:

Topic	Details
Topic 1	Demonstrate knowledge of ONTAP SAN configurations Demonstrate knowledge of ONTAP NAS configurations
Topic 2	Describe the hardware components in a Fibre Channel environment Describe software-defined ONTAP solutions
Topic 3	Software-defined ONTAP Solutions Describe the structure of ONTAP OS
Topic 4	Demonstrate knowledge of S3 server configurations Demonstrate knowledge of data replication issues
Topic 5	Demonstrate knowledge of troubleshooting ONTAP performance Demonstrate knowledge of ONTAP cluster administration

NEW QUESTION 11
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of “1.SHFHUXXXXXXXXXX.”
What is the cause of the reported Issue?

The shelf has been power cycled.

A new shelf was added to the controller.

The shelf had a disk replaced too quickly.

The shelf was cabled Incorrectly.

NEW QUESTION 12
Your customer noticed in NetApp Active IQ that their NetApp Cloud Volumes ONTAP forAzure HA solution
is no longer sending AutoSupport messages over HTTPS. A support ticket has been opened to find out why.
No changes have been made to the Cloud Volumes ONTAP for Azure HA environment.
In this scenario, which two autosupport command parameters should be used to validate that AutoSupport Is
working properly? {Choose two.)

-mail-hosts

-transport

-proxy-url

-to

NEW QUESTION 13
After a normal power down of both nodes forbuilding maintenance, Node01 of a 2-node cluster cannot be
powered back up; however, all disk shelves are powered.
Which action should be performed to bring the cluster online and allow Node02 to serve data?

Recreate the cluster with the system configuration recovery cluster recreate -from node command.

Reboot the node With the system node reboot -node Node02 -bypass-optimization true command.

Perform a takeover with the storage failover takeover -ofnode Node01 -option forcecommand.

Reinitialize the cluster with option 4a from the boot menu.

NEW QUESTION 14
Which two automation methods does NetApp ONTAP Select support? (Choose two.)

REST

Anslble

Docker

PHP

NEW QUESTION 15
When you review performance data for a NetApp ONTAP cluster node, there are back-to-back (B2B) type
consistency points (CPs) found occurring onthe loot aggregate.
In this scenario, how will performance of the client operations on the data aggregates be affected?

During B2B processing, clients will be unable to write data.

Data aggregates will not be affected by B2B processing on another aggregate.

During B2B processing, all I/O to the node is stopped.

During B2B processing, clients will be unable to read data.

NEW QUESTION 16
You receive the “Unable to connect to the management gateway server”error when trying to connect to a node
management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?

NEW QUESTION 17
You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show
command for more Information. You notice the “Urge” column has non-zero values.
In this scenario, which statement is true?

The aggregate is completely full.

The constituent volumes are out ofInodes.

The data placement is uneven.

The constituent volumes are completely full.

NEW QUESTION 18
A 2-node cluster hosts only NAS data UFs. Allnodes lose access to the cluster network.

Referring to the exhibit, which statement is correct?

Both nodes race to takeover the other, one node will takeover the other node.

No takeover event will occur and NAS data UFs will not be accessible.

All nodes in the cluster reset and NAS data UFs are not accessible after reboot.

NAS data UFs are accessible on only the node that has Epsilon.

NEW QUESTION 19
A user reports that a colleague saved a file called Test.txt from a UNIX system to a multiprotocol volume.
When opening the file later from a Windows system, it was not the file that they wanted. The file that they
wanted was named TEST~1.TXT.
Which statement explains this behavior?

UNIX name mapping updated the filename.

A Snapshot copy preserved two versions of the file.

Windows Volume Shadow Copy Service stored an older version of the file.

Case Insensitivity of SMB clients caused the file to be displayed with a different name.

NEW QUESTION 20
Your customer mentions that they have accidentally destroyed both rootaggregates in their two-node cluster.
In this scenario, what are two actions that must be performed? (Choose two.)

Rejoin the second node to the re-created cluster.

Re-create the cluster from the local backup.

Install ONTAP from a USB device.

Re-create the cluster from the remote backup.

NEW QUESTION 21
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?

iSNS is not enabled on the storage virtual machine.

The WWPN was not added to the initiator group.

The iSCSI service is not enabled on the interface.

CHAP isnot configured correctly for the specified initiator.

NEW QUESTION 22
Your customer complains that u host will constantly report losing a connection to the iSCSl target and then
report that the session was reestablished.

As shown in the exhibit, what is a cause of this flapping?

A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the
same IQN.

A host with an IP address of 172.20.10.80 and a secondhost with an IP address of 10.10.20.60 are in
different initiator groups.

A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are
accessing the same LUN.

A host with an IP address of 172.20.10.80 and a secondIP address of 10.10.20.60 is accessing different LUNs.

NEW QUESTION 23

Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?

Enter the metroclustor switchback command on Site B.

Enter the metrocluster switchback command on Site A.

Enter the storage failover giveback command on Site B.

Enter the storage failover giveback command on Site A.

NEW QUESTION 24
You want to assign storage access to an NVMe protocol host.
Which three objects must beconfigured to accomplish this task? (Choose three.)

the NVMe subsystem

the NVMe broadcast domain

an NVMe LIF

the NVMe namespace

an NVMe LUN

NEW QUESTION 25
When an administrator tries to create a share for an existing volume named voll, the process fails with an error.

Referring to the exhibit, what Is the reason for the error?

The volume must have a type of DP.

The volume has not beenmounted.

The CIFS service is not authenticating properly with the domain controller.

The CIFS service is not in workgroup mode.

NEW QUESTION 26
You have a new VMware vSphere cluster with ESXI 7.0U2 hosts. The hosts are connected to a 4-node AFF
A400 NetApp ONTAP9.8 cluster with FC LUNs. You have a requirement to identify and follow I/Os from
each VM on the shared FC LUN-backed datastores for troubleshooting purposes.
In this scenario, which VMware feature Is supported by ONTAP software to accomplish this task?

Network I/O Control (NIOC)

Virtual machine ID (VMID)

Storage I/O Control (SIOC)

vSphere Cluster Services (vCLS)

NEW QUESTION 27
After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for
wafl.dir.size.max logged for the volume of the SVM to which the share points.
In this scenario, which action should you take to solve this issue?

Delete unneeded files from the directory.

Move the volume to a different aggregate.

Increase the maximum numberof files for the volume.

Increase the maximum directory size for the volume.

NEW QUESTION 28
You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet
trace.
In this scenario, after you generate the packet trace, where do you find the trace file?

/packet_traces of the node hosting the LIF

/etc/log/packet_traces of the node hosting the LIF

/etc/log/mlog/packet._traces Of all nodes

/vol0/paclcet_traces of the CIFS SVM

NEW QUESTION 29
You are deploying NetApp ONTAP Select. When trying to add VMware vCenter to the inventory, you receive
the message shown below.
Credential authentication failed for x.x.x.x with: HostConnectionFailed
In this scenario, how would you correct this problem?

Change the vCenter password.

Change the IP address of the ONTAP Select Deploy VM.

Change the gateway address of the ONTAP Select Deploy VM.

Change the IP address of the vCenter server.

NEW QUESTION 30
A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards,
the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?

The customer did not configure name services on the SVM.

The clients must be restarted to start using NFSv4.

The export policy is not configured properly.

The ID mapping domains do not match between the client and server.

Loading …