Best 350-801 Exam Dumps for the Preparation of Latest Exam Questions [Q16-Q39] : Actual Test Materials : http://blog.actualtests4sure.com

Q16. Refer to the exhibit.

Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution On the Cisco UCM OS Administration page, the new NTP server shows as “Not Accessible” Which action resolves this issue?

Restart NTPD on the Cisco UCM server.

Delete and re-add the new NTP server via the Cisco UCM command-line interface

Start the NTP service on the new NTP server

Configure the “reach” value as “377” for the new NTP server.

Q17. Which endpoint feature is supported using Mobile and Remote Access through Cisco Expressway?

SRST

SSO

H.323 registration proxy to Cisco Unified Communications Manager

MGCP gateway registration

Q18. Which action prevent toll fraud in Cisco Unified Communications Manager?

Configure ad hoc conference restriction.

Implement toll fraud restriction in the Cisco IOS router.

Allow off-net to off-net transfers.

Implement route patterns in Cisco Unified CM.

Q19. Where in Cisco UCM are codec negotiations configured for endpoints?

in enterprise parameters

under device profiles in device settings

under regions using preference lists

in in-service parameters

Q20. Refer to the exhibit. Assume that the bottom logical partition policy entry in Cisco Unified Communications Manager was provisioned last.
How is the call treated when an IP phone in the Bangalore GeoLocation places a call to a MGCP gateway with FXS ports in the San Jose GeoLocation?

The call is denied because the last added logical partition policy takes precedence when multiple matches exist.

The call is allowed because the first listed logical partition policy takes precedence when multiple matches exist.

The call is denied because the call flow matches neither policy entries.

The call is allowed because the call flow matches neither policy entries.

The call is allowed because only the top policy entry matches the call flow.

Q21. How can an administrator stop Cisco Unified Communications Manager from advertising the OPUS codec for recording enabled devices?

In CUCM Service Parameters set “Opus codec Enables” to “Enabled for all devices Except Recording-Enabled devices.

Go to the phone’s configuration page and set “Advertise OPUS Codec” to be “false”

Router recorded calls through Cisco Unified Border Element because it does not support OPUS.

Integrate the Cisco Unified CM with a recording solution that does not support OPUS.

Q22. An engineer wants to manually deploy a Cisco Webex DX80 video endpoint to an end user. Which type of provisioning can be configured on the endpoint?

CUC

CUBE

CMS

Edge

Q23. A presence redundancy group is deployed, and an engineer with ID012345678 initiates a Manager fallback. Which statement about Cisco server Recovery Manager is true?

restart the Cisco Presence Engine

disconnects all user that had been failed over

restarts critical services on the secondary node

disconnects all users that had been failed over, and the users must log in again

Q24. Which recommendation is the best practice for marking video and voice media in a cisco Unified Communications network?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q25. Which field is configured to change the caller ID information on a SIP route pattern?

Calling party Transformation Mask

Route partition

Called party Transformation Mask

Connected Line ID Presentation

Q26. An administrator must configure the local route group feature on cisco UCM. Which step will enable this feature?

For each route list configure a route group to use as a Local Route Group.

For each route pattern, select the Local Route Group as the destination.

For each route group, check the box for the Local Route Group feature.

For each device pool. configure a route group to use as a Local Route Group for that device pool

Q27. A company wants to provide remote user with access to its premises Cisco collaboration features. Which components are required to enable cisco mobile and remote access for the users?

Cisco Unified Border Element, Cisco IM and Presence Server, and Cisco Video Communication Server

Cisco Expressway-E Cisco Expressway-C and Cisco UCM

Cisco Expressway-E, Cisco IM and Presence Server, and Cisco Video Communication Server

Cisco Unified Border Element. Cisco UCM, and Cisco Video Communication Server

Q28. According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.

Q29. What are two key features of the Expressway series? (Choose two.)

VPN connect toward the internal UC resources

B2B calls

IP to PSTN call connectivity

Device registration over the internet

SIP header modification

Q30. A customer reports that the Cisco UCM toll-fraud prevention does not work correctly, and the customer is receiving charges for unapproved international calls as a result. Which two configuration changes resolve the issues? (Choose two.)

Use Cisco Unified Border Element to debug the calls.

Disable call forwarding on the phone.

Make the calls route through a firewall.

Mark patterns as off-net or on net.

Modify the Block OffNet to OffNet Transfer service parameter.

Q31. Which SNMP service must be activated manually on the Cisco Unified Communications Manager after installation?

Cisco CallManager SNMP

SNMP Master Agent

Connection SNMP Agent

Host Resources Agent

Q32. According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.

Q33. According to the QoS Baseline Model, drag and drop the applications from the left onto the Per-Hop Behavior values on the right.

Q34. Refer to the exhibit.

What is a possible cause of the PRI issue?

The cable is unplugged.

The controller shut down.

The clock source is incorrect.

The framing is configured incorrectly.

Q35. An administrator must configure the local route group feature on cisco UCM. Which step will enable this feature?

For each route list configure a route group to use as a Local Route Group.

For each route pattern, select the Local Route Group as the destination.

For each route group, check the box for the Local Route Group feature.

For each device pod. configure a route group to use as a Local Route Group for that device pool

Q36. An administrator is in the process of moving Cisco Unity Connection mailboxes between mailbox stores. The administrator notices that some mailboxes have active Message Waiting indicators. What happens to these mailboxes when they are moved?

The MWI status is retained after a mailbox is moved from one store to another

The move will fail if MWI status is active

If source and target mailbox store are not disabled, MWI status is not retained

Moving the mailboxes from one store to another fails if MWI is turned on

Q37. Which two steps should be taken to provision after the Self-Provisioning feature was configured for end users?

Dial the self-provisioning IVR extension and associate the phone to an end user.

Plug the phone into the network.

Ask the Cisco UCM administrator to associate the phone to an end user.

Enter settings menu on the phone and press *,*,# (star, star, pound).

Dial the hunt pilot extension and associate the phone to an end user.

Q38. A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as
011841234567?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q39. An administrator must configure the local route group feature on cisco UCM.
Which step will enable this feature?

For each route list configure a route group to use as a Local Route Group.

For each route pattern, select the Local Route Group as the destination.

For each route group, check the box for the Local Route Group feature.

For each device pool, configure a route group to use as a Local Route Group for that device pool

Best 350-801 Exam Dumps for the Preparation of Latest Exam Questions [Q16-Q39]

Conclusion

Cisco 350-801 Exam and Its Peculiar Features