This page was exported from Actual Test Materials [ http://blog.actualtests4sure.com ] Export date:Fri Nov 15 20:15:54 2024 / +0000 GMT ___________________________________________________ Title: Best 350-801 Exam Dumps for the Preparation of Latest Exam Questions [Q16-Q39] --------------------------------------------------- Best 350-801 Exam Dumps for the Preparation of Latest Exam Questions 350-801 Actual Questions 100% Same Braindumps with Actual Exam! Conclusion Obtaining the passing score in the Cisco CLCOR 350-801 test is feasible as long as the candidates use verified training materials. By using the vendor's official training courses and investing self-study time using the books found on Amazon, the candidates have higher chances to pass such an exam from the first attempt. By getting certified, the successful candidates will become valuable team members for any international organization looking for a skilled professional whose skills have been verified by a trustful vendor.   Q16. Refer to the exhibit.Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution On the Cisco UCM OS Administration page, the new NTP server shows as “Not Accessible” Which action resolves this issue?  Restart NTPD on the Cisco UCM server.  Delete and re-add the new NTP server via the Cisco UCM command-line interface  Start the NTP service on the new NTP server  Configure the “reach” value as “377” for the new NTP server. Q17. Which endpoint feature is supported using Mobile and Remote Access through Cisco Expressway?  SRST  SSO  H.323 registration proxy to Cisco Unified Communications Manager  MGCP gateway registration Section: Call ControlQ18. Which action prevent toll fraud in Cisco Unified Communications Manager?  Configure ad hoc conference restriction.  Implement toll fraud restriction in the Cisco IOS router.  Allow off-net to off-net transfers.  Implement route patterns in Cisco Unified CM. https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified- communications-manager-express/107626-cme-toll-fraud.htmlQ19. Where in Cisco UCM are codec negotiations configured for endpoints?  in enterprise parameters  under device profiles in device settings  under regions using preference lists  in in-service parameters Q20. Refer to the exhibit. Assume that the bottom logical partition policy entry in Cisco Unified Communications Manager was provisioned last.How is the call treated when an IP phone in the Bangalore GeoLocation places a call to a MGCP gateway with FXS ports in the San Jose GeoLocation?  The call is denied because the last added logical partition policy takes precedence when multiple matches exist.  The call is allowed because the first listed logical partition policy takes precedence when multiple matches exist.  The call is denied because the call flow matches neither policy entries.  The call is allowed because the call flow matches neither policy entries.  The call is allowed because only the top policy entry matches the call flow. Q21. How can an administrator stop Cisco Unified Communications Manager from advertising the OPUS codec for recording enabled devices?  In CUCM Service Parameters set “Opus codec Enables” to “Enabled for all devices Except Recording-Enabled devices.  Go to the phone’s configuration page and set “Advertise OPUS Codec” to be “false”  Router recorded calls through Cisco Unified Border Element because it does not support OPUS.  Integrate the Cisco Unified CM with a recording solution that does not support OPUS. https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/211297-Configure-Opus-Support-on-Cisco-Unified.pdfQ22. An engineer wants to manually deploy a Cisco Webex DX80 video endpoint to an end user. Which type of provisioning can be configured on the endpoint?  CUC  CUBE  CMS  Edge Q23. A presence redundancy group is deployed, and an engineer with ID012345678 initiates a Manager fallback. Which statement about Cisco server Recovery Manager is true?  restart the Cisco Presence Engine  disconnects all user that had been failed over  restarts critical services on the secondary node  disconnects all users that had been failed over, and the users must log in again Q24. Which recommendation is the best practice for marking video and voice media in a cisco Unified Communications network?A)B)C)D)  Option A  Option B  Option C  Option D Q25. Which field is configured to change the caller ID information on a SIP route pattern?  Calling party Transformation Mask  Route partition  Called party Transformation Mask  Connected Line ID Presentation Cisco Unified Communications Manager uses connected line ID presentation (COLP/COLR) as a supplementary service to allow or restrict the called party phone number on a call-by-call basis.Calling Party Transform Mask, Enter a transformation mask value. Valid entries include the digits0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +.Q26. An administrator must configure the local route group feature on cisco UCM. Which step will enable this feature?  For each route list configure a route group to use as a Local Route Group.  For each route pattern, select the Local Route Group as the destination.  For each route group, check the box for the Local Route Group feature.  For each device pool. configure a route group to use as a Local Route Group for that device pool Q27. A company wants to provide remote user with access to its premises Cisco collaboration features. Which components are required to enable cisco mobile and remote access for the users?  Cisco Unified Border Element, Cisco IM and Presence Server, and Cisco Video Communication Server  Cisco Expressway-E Cisco Expressway-C and Cisco UCM  Cisco Expressway-E, Cisco IM and Presence Server, and Cisco Video Communication Server  Cisco Unified Border Element. Cisco UCM, and Cisco Video Communication Server Q28. According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right. ExplanationVoice = EFInteractive Video = AF41Bulk Data = AF11Call-Signaling = AF31/CS3Network Management = CS2https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/QoQ29. What are two key features of the Expressway series? (Choose two.)  VPN connect toward the internal UC resources  B2B calls  IP to PSTN call connectivity  Device registration over the internet  SIP header modification Q30. A customer reports that the Cisco UCM toll-fraud prevention does not work correctly, and the customer is receiving charges for unapproved international calls as a result. Which two configuration changes resolve the issues? (Choose two.)  Use Cisco Unified Border Element to debug the calls.  Disable call forwarding on the phone.  Make the calls route through a firewall.  Mark patterns as off-net or on net.  Modify the Block OffNet to OffNet Transfer service parameter. Q31. Which SNMP service must be activated manually on the Cisco Unified Communications Manager after installation?  Cisco CallManager SNMP  SNMP Master Agent  Connection SNMP Agent  Host Resources Agent Q32. According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right. ExplanationVoice = EFInteractive Video = AF41Bulk Data = AF11Call-Signaling = AF31/CS3Network Management = CS2https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/QoQ33. According to the QoS Baseline Model, drag and drop the applications from the left onto the Per-Hop Behavior values on the right. Q34. Refer to the exhibit.What is a possible cause of the PRI issue?  The cable is unplugged.  The controller shut down.  The clock source is incorrect.  The framing is configured incorrectly. Q35. An administrator must configure the local route group feature on cisco UCM. Which step will enable this feature?  For each route list configure a route group to use as a Local Route Group.  For each route pattern, select the Local Route Group as the destination.  For each route group, check the box for the Local Route Group feature.  For each device pod. configure a route group to use as a Local Route Group for that device pool Q36. An administrator is in the process of moving Cisco Unity Connection mailboxes between mailbox stores. The administrator notices that some mailboxes have active Message Waiting indicators. What happens to these mailboxes when they are moved?  The MWI status is retained after a mailbox is moved from one store to another  The move will fail if MWI status is active  If source and target mailbox store are not disabled, MWI status is not retained  Moving the mailboxes from one store to another fails if MWI is turned on Section: Collaboration ApplicationsExplanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/12x/administration/guide/ b_12xcucsag/b_12xcucsag_chapter_01000.htmlQ37. Which two steps should be taken to provision after the Self-Provisioning feature was configured for end users?  Dial the self-provisioning IVR extension and associate the phone to an end user.  Plug the phone into the network.  Ask the Cisco UCM administrator to associate the phone to an end user.  Enter settings menu on the phone and press *,*,# (star, star, pound).  Dial the hunt pilot extension and associate the phone to an end user. Q38. A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as011841234567?A)B)C)D)  Option A  Option B  Option C  Option D Q39. An administrator must configure the local route group feature on cisco UCM.Which step will enable this feature?  For each route list configure a route group to use as a Local Route Group.  For each route pattern, select the Local Route Group as the destination.  For each route group, check the box for the Local Route Group feature.  For each device pool, configure a route group to use as a Local Route Group for that device pool  Loading … Cisco 350-801 Exam and Its Peculiar Features Cisco doesn't usually reveal the details of its exams. The same works for 350-801 CLCOR. However, there are some basic details related to this certification test that are known from the previous examinees. For example, it is known that Cisco 350-801 is made up of multiple-choice questions. The candidates must complete all these questions within the allocated time of 120 minutes. The test is delivered in the English language only. It is available for the applicants at the price of $400. You can register for your exam on the Pearson VUE website. To prepare for the Cisco 350-801 exam, the students can opt for different options, including the official instructor-led training course. It is available on the Cisco site. Implementing Cisco Collaboration Core Technologies (CLCOR) is a paid course designed for those individuals who already have some level of experience in computer networking.   350-801 Study Material, Preparation Guide and PDF Download: https://www.actualtests4sure.com/350-801-test-questions.html --------------------------------------------------- Images: https://blog.actualtests4sure.com/wp-content/plugins/watu/loading.gif https://blog.actualtests4sure.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-08-18 12:01:36 Post date GMT: 2022-08-18 12:01:36 Post modified date: 2022-08-18 12:01:36 Post modified date GMT: 2022-08-18 12:01:36