This page was exported from Actual Test Materials [ http://blog.actualtests4sure.com ] Export date:Fri Nov 15 21:42:56 2024 / +0000 GMT ___________________________________________________ Title: Latest Cisco 350-601 Exam questions and answers [Q76-Q96] --------------------------------------------------- Latest Cisco 350-601 Exam questions and answers Actualtests4sure 350-601 Exam Practice Test Questions (Updated 395 Questions) NEW QUESTION 76Refer to the exhibit.An engineer is configuring a VSAN on the network Which option must be selected to create the VSAN?  Fabric B  FC Zoning Enabled  Fabric A  Common/Global NEW QUESTION 77An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?  It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.  It always is enabled on 10/100-Mbps native Ethernet ports.  It provides the authentication of peers on the Cisco Nexus switch.  It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface. The Data Center Bridging Exchange Protocol (DCBXP) is an extension of LLDP. It is used to announce, exchange, and negotiate node parameters between peers. DCBXP parameters are packaged into a specific DCBXP TLV. This TLV is designed to provide an acknowledgement to the received LLDP packet. DCBXP is enabled by default, provided LLDP is enabled. DCBXP is disabled on ports where LLDP transmit or receive is disabled. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/layer2/503_n2_1/b_Cisco_n5k_layer2_config_gd_rel_503_N2_1/b_Cisco_n5k_layer2_config_gd_rel_503_N2_1_chapter_01110.htmlNEW QUESTION 78Drag and drop the storage technologies from the left onto the correct descriptions on the right. NEW QUESTION 79Drag and drop the characteristics from the left onto the NAS protocols on the right. Some characteristics are used more than once NEW QUESTION 80What is an advantage of NFS as compared to Fibre Channel?  NFS enable thin provisioning for LUNs.  NFS provides the dynamic allocation of storage capacity.  NFS removes the impact of IP overhead.  NFS provides direct access to the underlying storage hardware. Explanationhttps://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/BRKINI-1011.pdfNEW QUESTION 81Refer to the exhibit.Which statement about the default gateway configuration of the vPC is true?  N7K-1 acts as the default gateway for all traffic.  N7K-2 forwards traffic that is destined for the default gateway by using the peer link.  N7K-2 acts as the default gateway for all traffic.  Either switch can act as the active default gateway. NEW QUESTION 82Refer to the exhibit.Which two statements about the routing table of the leaf switch are true? (Choose two.)  The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.  172.16.100.0/24 is a BD subnet in ACI.  The next hop 10.0.8.65 for route 10.20.1.0./24 is the TEP address of a border leaf in ACI.  The next hop 10.1.168.95 for route 172.16.100.0/24 is the TEP address of a border leaf in ACI.  10.20.1.0./24 is a BD subnet in ACI. NEW QUESTION 83Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?  switch(config-vsan-cb># vsan 100 bind interface fc 3/1  switch<config-vsan-db)# vsan 100 bind interface vfc 31  switch(config-vsan-db># vsan 100 fc 3/1  switch(config-vsan-db)# vsan 100 interface vfc 31 https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/ CLIConfigurationGuide/vsan.htmlNEW QUESTION 84A network engineer must configure a Fibre Channel port monitoring for the local port. The source port should be monitored in the ingress direction. which configuration should be implemented to achieve this objective?  Option A  Option B  Option C  Option D NEW QUESTION 85An engineer is implementing security on the Cisco MDS 9000 switch.Drag and drop the descriptions from the left onto the correct security features on the right. NEW QUESTION 86An engineer is duplicating an existing Cisco UCS setup at a new site.What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)  contains the configured organizations and locales  contains the VLAN and VSAN configurations  contains the AAA and RBAC configurations  contains all of the configurations  contains a file with an extension tgz that stores all of the configurations Section: ComputeNEW QUESTION 87An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)  MAC addresses  WWPNPool  WWNN  VLAN ID  Fabric ID NEW QUESTION 88An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect. Which backup type must be selected to meet these requirements?  all configuration  system configuration  logical configuration  full state https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_01001.htmlNEW QUESTION 89A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right. NEW QUESTION 90An engineer requires a solution to automate the configuration and deployment of remote network devices for a customer. The engineer must keep these considerations in mind:* The customer’s environment is based on industry-accepted standards and requires a solution that meets these standards.* The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS.* The solution must be based on a human-readable and easy to parse format such as XML or JSON.Which solution must be used to meet these requirements?  SNMP  REST API  Ansible  NETCONF Please confirm with colleagues.NEW QUESTION 91An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created. The cluster IP address is 10.68.68.68.Which command set creates this certificate request?  UCS-A # scope keyring kr2016UCS-A /keyring # create certreq 10.68.68.68 sjc2016UCS-A /keyring* # commit-buffer  UCS-B # scope keyring kr2016UCS-B /keyring # create certreq ip 10.68.68.68 subject-name sjc2016UCS-B /keyring* # commit-both  UCS-B# scope securityUCS-B /security # scope keyring kr2016UCS-B /security/keyring # set certreq 10.68.68.68 sjc2016UCS-B /security/keyring* # commit-both  UCS-A# scope securityUCS-A /security # scope keyring kr2016UCS-A /security/keyring # create certreq ip 10.68.68.68 subject-name sjc2016 UCS-A /security/keyring* # commit-buffer https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Admin- Management/4-0/b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_4-0/ b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_4-0_chapter_0110.htmlNEW QUESTION 92What is a characteristic of the install all command on the cisco Nexus series switch?  Upgrades only certain modules  Impact data plan traffic  Continues the upgrade process if any step in the sequence fails  Automatically checks the image integrity https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Software_Upgrade_and_Downgrade_Guide_Release_7x/ b_Cisco_Nexus_9000_Series_NXOS_ Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html install all command automatically checks the image integrity, which includes the NXOS software image. The command performs a platform validity check to verify that a wrong image is not used. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/upgrade/7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x_newGuide_chapter_01.htmlNEW QUESTION 93A customer data center is configured for distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call home features to be constrained to DC2. Which two configuration sets must be used to meet these requirements? (Choose two.)  Option A  Option B  Option C  Option D  Option E This is a confusing question actually. But I selected DE because they have “cfs region x”. configuration without keyword region should not be accepted on the switch. Please test that on a nexus switch.https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/system_management/configuration/guide/sm_nx_os_cli/sm_2cfs.htmlNEW QUESTION 94Drag and drop the characteristics from the left onto the correct storage systems on the right. Explanation:2,4,5 – NAS 1,3 – SANNEW QUESTION 95Refer to the exhibit.Refer to the exhibit. An engineer needs to implement streaming telemetry on a cisco MDS 9000 series switch. The requirement is for the show command data to be collected every 30 seconds and sent to receivers. Which command must be added to the configuration meet this requirement?  Snsr-grp 200 sample-interval 30  Sensor-grp 200 sample-period 30000  Snsr-grp 200 sample-interval 30000  Sensor-grp 200 sample-period 30 snsr-grp <id> sample-interval <interval> Currently, sensor group ID supports only numeric ID values. Specify the streaming sample interval value; the value must be in milliseconds. The minimum streaming sample interval that is supported is 30000 milliseconds. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/san_analytics/cisco-mds9000-san-analytics-telemetry-streaming-config-guide-8x/configuring-san-telemetry-streaming.htmlNEW QUESTION 96Refer to the exhibit. An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails. Which action accomplishes this objective?  Configure the eight uplinks in a port channel.  Change the supported FEX type.  Set the pinning max-links value to 8.  Statically assign each host interface to a fabric uplink.  Loading … Pass Your Cisco Exam with 350-601 Exam Dumps: https://www.actualtests4sure.com/350-601-test-questions.html --------------------------------------------------- Images: https://blog.actualtests4sure.com/wp-content/plugins/watu/loading.gif https://blog.actualtests4sure.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-11-12 12:32:48 Post date GMT: 2022-11-12 12:32:48 Post modified date: 2022-11-12 12:32:48 Post modified date GMT: 2022-11-12 12:32:48