QUESTION 98
Due to industry regulation a customer is required to store backup at a separate data center from the company’s main data center. The customer application require fast backup and quick restore increase of data lose. Which solution allow the customer to meet both industry and application requirement?

QUESTION 99
You are designing a solution that will have a new HPE Synergy frame and an HPE 3PAR StoreServ 8200 storage array with only the built-in ports. This new environment must keep the infrastructure within the data center to a minimum.
Which interconnect module will achieve this goal?

QUESTION 100
You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.
They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.
Which storage connectivity components should you recommend?

QUESTION 101
A customer environment includes:
10 DL380 Gen8 servers in a VMware Cluster
2 MSA storage arrays
2 8GB b-series fibre channel switches
The customer needs to replace their environment because it is end of life. They have limited budget. The customer is primarily concerned with management because they have limited IT staff, and they want to move away from fibre channel.
Which HPE Storage should you recommend?

QUESTION 102
Match the feature to the appropriate C-Series DCNM license type.

QUESTION 103
During Technology workshop ,the customer asks about different between converged and fibre channel switches. What would be a benefits of using flex fabric switches in a fibre channel storage environment?

QUESTION 104
Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

QUESTION 105
A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD’s configured with RAID5 7+1. They plan to add four more 3.84 TB SSD’s.
What needs to be changed on the configuration once the new SSD’s are installed?

QUESTION 106
Refer to the exhibit:

Which type of data format do you expect in the red rectangle?

QUESTION 107
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?

QUESTION 108
You need to create an N:M relationship between VMware hypervisors and virtual volumes with the least amount of administrative overhead.
Click the option where you can create a group of VMware hypervisors for volumes provisioning.

QUESTION 109
A customer is purchasing an HPE MSA 2050 for a branch office. They will use it for critical data services. The customer is concerned that 64 snapshots will not be adequate as they grow.
What can be added to the array to address the customer’s concerns?

QUESTION 110
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?

QUESTION 111
You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more than 500GB.
Which technology should you recommend?

QUESTION 112
Which HPE storage solutions offer a two-tier backup solution for hybrid cloud with optimal recovery time? (Choose two.)

QUESTION 113
An HPE 3PAR StoreServ 9000 All-Flash Array customer plans to deploy a secondary array 20 km away from their primary array to enable storage replication over a dark fibre. Their existing environment consists of one HPE Synergy Frame 12000, HPE SN6000B Fibre Channel Switches, HPE FlexFabric 5700 Switch Series, and HPE StoreOnce Systems.
Which HPE license is required to meet the customer’s technical requirements?

QUESTION 114
A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports.
Which feature will address the customer’s concern?

QUESTION 115
A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.
Which HPE storage solution should you recommend?

QUESTION 116
Which tool is used to determine current compaction ratios on Primera arrays?

QUESTION 117
A customer successfully implemented an HPE Primera solution.
Which tool can be used to verify performance counters, such as IOPS, match customer requirements?

QUESTION 118
A customer is evaluating an HPE 3PAR StoreServ system in a proof-of-concept project. The customer wants to receive emails about important storage system events and alerts.
What feature do you need to configure?

QUESTION 119
What is the typical protocol used to access data from object storage?