Get Real HPE6-A69 Quesions Pass HP Certification Exams Easily [Q19-Q41] : Actual Test Materials : http://blog.actualtests4sure.com

NO.19 Before designing a new network solution for a customer with between 2398 and 5264 employees, you should gamer Information from the customer about their wired network needs.
What are valid questions to determine their wired network needs? (Select two.)

How experienced is your networking team?

What is the current cabling deployed in the location?

What are the current device capabilities and topology?

Do you plan to add new customer services?

How much do you plan to spend in the new wired network?

NO.20 Which statement is true regarding IP-SLA?

ArubaOS-CX supports Doth SLA configuration through CU and by agents through the NAE.

ArubaOS-CX supports forever tests

ArubaOS-CX supports on-demand as well as forever tests.

The default and minimum probe interval for voip SLA is 180 seconds

NO.21 When applying me following access-Iist to an ArubaOS-CX 6300 switch:

How does this ACL behave on the selected switch? (Select two.)

The mp traffic to MANAGEMENT-SERVERS group is logged to me event logs

The tftp traffic to MANAGEMENT-SERVERS group is not logged to the event logs.

The snmp-trap traffic to MANAGEMENT-SERVERS is logged to the event togs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is logged to event logs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is not logged to event logs

NO.22 (Scenarios may contain multiple errors which may or may not impact the solution ) Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration It is required to implement VSX at the aggregation layer The pons of the ArubaOS-CX 8325 switches used for Agg01 and Agg02 are populated as follows:

The configuration of switch AGG01 includes

The VSX cluster is not forming. Which modification should you make to resolve the error condition?

Modify the system interface-group 4 speed tOg command change “25g” to “10g”

Modify the keepalive peer 192.168 20.2 source 192 168.20 1 command, changing “vrf KA” to “vrf mgmt”

Edit the vsx-sync command, adding “keep-alive”

Modify the vsx definition, changing “inter-switch-link lag 2″ to” inter-switch-link lag 256″

NO.23 You have designed a new wired solution for a customer that uses gateways and Dynamic Segmentation Which statements about User-Based Tunneling are true? (Select two)

In U8T, the switch performs user authentication.

in UBT, the Aruba Gateway performs user authentication

UBT is supported only with Aruba Gateway standalone

in UBT, the switch sends user role Information to Aruba Gateway

In UBT, the Aruba Gateway assigns the Primary user role

NO.24 Company A and Company B are merging their BGP routed networks The companies have overlapping IP ranges and security concerns during the migration phase. Which Aruba CX 8325 functionality would help the merging of networks in a secure way?

Use of ACL’s to separate the company networks at the VLAN level

Use of Aruba Gateway appliance to control the routes between merged networks

Use of vsf capable switch to integrate the routing

Use of virtual route forwarding and BGP route leaking

The ArubaOS-CX switch requires plain-text authentication with OSPF.

The third-party switch should be configured with MD5 authentication

The ArubaOS-CX switch does not expect authentication with OSPF.

The third-party switch should be configured with key chain authentication

NO.26 Which statement is true regarding remote mirroring?

The same source/destination address can be used in multiple sessions.

Per session multiple destination addresses can be configured

The ArubaOS-CX switch supports a maximum of two mirroring sessions

When mirroring destination is tunnel, a DSCP value can be set on the tunnel

NO.27 Which statements are true with regards to Strict Priority scheduling? (Select two.)

Strict Priority scheduling protects against starvation of low priority queues.

Under strict Priority, the port will never forward a packet in a tower priority queue if a higher priority queue includes even one packet.

Strict Priority must be used with egress queue shaping to prevent starvation.

Strict Priority works best when the network uses the higher priority queues for the majority of applications

NO.28 The customer is already using Aruba Gateway and third-party L2 switches New ArubaOS CX 6300 switches have been deployed for R&D. which have a requirement for user profiling and tunneled traffic between ArubaOS CX 6300 and Aruba Gateway What is required for this configuration to apply QoS user-based rules for the R&D client traffic?

Apply a QoS rule to the ArubaCX 6300 client port, lo classify traffic before it is tunneled.

Apply a port-access policy with QoS defined in the user role on the ArubaOS CX6300 switch

Manually prioritize IP protocol 47 traffic on the third-party switches to prioritize the tunneled traffic

Create a QoS policy for the UBT-client-VLAN traffic on the third-party switch.

NO.29 The customer has a requirement for creating security filtering for IPv4 and IPv6 traffic passing through an ArubaOS-CX 6400 switch. Which statement Is true about access-list on the selected switch model?

IPv4 and IPv6 entries can be used in one ACL with separate rules

Separate IPv4 and IPv6 ACLs need to be created for inbound and outbound traffic

Only one inbound or outbound ACL can be bound to an interface.

Routed interfaces can have only inbound ACLs

NO.30 Which functionalities of ClearPass can be added in a wired network that implements dynamic segmentation?
(Select two.)

Profiling

Fingerprinting

Downloadable user Roles

Multi Factor Authentication

Dynamic VLANs

NO.31 The customer is implementing new ArubaOS-CX 6300 switches into an environment that has third-party switches and uses centralized authentication from Microsoft Active Directory and TACACS* servers What would be a valid configuration requirement for ArubaOS-CX switches for centralized user authentication?

Importing a TACACS server certificate for TLS authentication into the switch

Defining a TACACS server group for authentication in the switch configuration

Enabling the active directory VSA in the switch for radius authentication

Using a PAM extension for LDAP authentication with Active Directory Server.

NO.32 (Scenarios may contain multiple errors which may or may not Impact the solution > Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration it is required to implement VSX keep-alive at the aggregation layer.
The ports of the ArubaOS-CS 8325 switches used for Agg01 and Agg02 are populated as follows:

The configuration of switch AGG01 includes:

VSX keep-alive is not working. Which modification should you make lo resolve the error condition?

Edit interface 1/1/48, adding the command “vpn-instance KA”

Modify the Interface lag 2 command, removing “multi-chassis”

Modify the Keepalive peer 192.168.20.2 source 192 168.20.1 command, adding “vrf KA”

Edit the vsx-sync command, adding “keep-alive”

NO.33 Which statement is true about NAE scripts’?

The System Resource Monitor is the only script Installed on the system by default.

The System Resource Monitor and Health Monitor a/e the only scripts installed on the system by default

No script is installed on the system by default.

The Health Monitor is the only script installed on the system by default.

NO.34 Match the repotted status to the Aruba 8325 issue (Each option may Be used once more than once, or not at all)

NO.35 What are two valid steps in a Proof of Concept plan? (Select two)

Development of the items to Be tested

Engineering a proposed solution

Definition of success criteria

Acceptance of the proposed solution

NO.36 Refer to the exhibit.

You want to protect the aggregation layer if the VSXISL falls. Where should you place a VSX keepalive link?

On VSX LAG 1

On a dedicated link created using port 1’1/48 of each aggregation switch

On the OOBM ports of both aggregation switches

On VSX LAG 101

NO.37 ArubaOS-CX 8325 VSX configuration has a Tailed ISL link between the switches with keepalive status established. While troubleshooting the condition, what is the expected behavior of the VSX traffic flow in the current condition?

vsx tables are n sync

VSX tables are out of sync

VSX nodes Keep forwarding traffic over its interfaces

VSX protection state is OK

VSX peer is seen as down

NO.38 The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices.
The client’s default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied.

What advice can you offer the customer? (Select two)

The ISL Bandwidth should be upgraded

Agg-1 and Agg-2’s hardware forwarding table profile should be changed to “L3-agg”.

The -system-mac’ of Agg-1 should be changed to an unused address from the unicast private address range

The vsx linkup-delay timer is unnecessarily high; it should be reduced to prevent excessive delay of packet forwarding when a VSX peer joins an existing master.

The Keepalive interface should be changed to interface LAG2 so there is redundancy through the mobility cluster.

The keepalive subnet is misconfigured, it has an inappropriate address on Agg-1.

NO.39 Match the BGP path selection criteria attributes (Each option may be used once, more than once, or not at all)

NO.40 Refer to the exhibit.

Which statement is true?

Q1 and S1 are applied to all interfaces mat do not have a QoS override applied

To be effective, both Q1 and S1 still need to be applied to Interfaces

No default queues are changed

Q1 and S1 are applied to all interfaces.

NO.41 You are working with a customer whos has a paw of Aruba 8325 switches configured for Multi-Chassis Link Aggregation The customer is complaining that users are experiencing intermittent packet drops. Which action should be taken to quickly aid you in identifying the cause?

Enable debug of vri with “console” set as the destination

Setup a mirror session to generate a Tshark file.

Setup a mirror session to niter packets for TCPDUMP analysis

Check the configured VLANs using “show vsx config-consistency”