This page was exported from Actual Test Materials [ http://blog.actualtests4sure.com ] Export date:Fri Nov 15 19:23:14 2024 / +0000 GMT ___________________________________________________ Title: [Nov 29, 2023] 300-810 Exam Dumps PDF Updated Dump from Actualtests4sure Guaranteed Success [Q50-Q67] --------------------------------------------------- [Nov 29, 2023] 300-810 Exam Dumps PDF Updated Dump from Actualtests4sure Guaranteed Success Pass Your Cisco Exam with 300-810 Exam Dumps Cisco 300-810 exam is a 90-minute test consisting of approximately 60-70 questions. The questions may be in the form of multiple choice, drag and drop, or simulation. 300-810 exam is proctored and can be taken at a Pearson VUE testing center or online. To pass the exam, the candidate must score at least 80% on the test. Cisco 300-810 exam is an important certification exam for IT professionals who are looking to validate their expertise in implementing Cisco Collaboration Applications. 300-810 exam is designed to test the candidates' knowledge and skills in various areas such as Cisco Unified Communications Manager (CUCM), Cisco Unity Connection, Cisco Unified IM and Presence, and Cisco Expressway. 300-810 exam is intended for those who are working in the field of collaboration technologies and want to enhance their career prospects.   NO.50 Which service must be activated on Cisco Unity Connection to utilize LDAP synchronization?  Cisco Tomcat  Cisco Sync Agent  Cisco DirSync  Cisco RIS Data Collector NO.51 Refer to the exhibit. An engineer must configure Cisco IM and Presence server high availability so that the publisher node fails over to the subscriber node if the publisher node becomes unavailable On the Presence Redundancy Group Configuration page the engineer receives this message ‘High availability is not enabled for this cluster ” Which two actions must the engineer perform to resolve the issue? (Choose two.)  Add IMPSub as a secondary presence server in the redundancy group  Click Save and restart the Cisco Presence Engine.  Replace iMPPub with IMPSub m the redundancy group.  Add a new presence redundancy group and click Save  Select Enable High Availability and dick Save. NO.52 An engineer must configure Microsoft Office 365 calendar integration with Cisco IM and Presence The engineer has already configured the presence gateway Drag and drop the remaining configuration steps from the left into the correct order on the right to complete the configuration NO.53 An engineer is assisting a user who is reporting Jabber desk phone control issues. The user has two desk phones, but jabber controls only one of them. The user is mot given the option to select the second phone within the Jabber client. Everything else is functioning normally with Jabber and with both desk phones.Which action resolves this issue?  Set the Owner User ID on the second phone  Ensure that both phones are in the same device pool  Add the problematic phone to the user’s Controlled Devices list  Enable “Allow Control of Device from CTI” on the second phone. NO.54 Which Cisco Unified Connections Manager service is required for users to control their desk phones using Cisco Jabber?  Cisco CTIManager  Cisco CTL Provider  Cisco Presence Engine  Cisco Serviceability Reporter Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/ CJAB_BK_D00D8CBD_00_deployment-installation-guide-cisco-jabber115/ CJAB_BK_D00D8CBD_00_deployment-installation-guide-cisco-jabber115_chapter_0111.htmlNO.55 Drag and drop the steps for SAML SSO authentication from the left into the order on the right. Reference:https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/SAML_SSO_deployment_guide/12_5_1/cucm_b_saml-sso-deployment-guide-12_5/cucm_b_saml-sso-deployment-guide-12_5_chapter_01.htmlNO.56 An engineer needs to configure individual call handler greetings on Cisco Unity Connection so that a single greeting can override all other greetings set by users during a holiday period. Which type of greeting should be configured to accomplish this goal?  internal  holiday  alternate  closed Reference:https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/ guide/10xcucsagx/10xcucsag080.htmlNO.57 Drag and drop the events for an on-premises Jabber SAML SSO flow from the left into the correct order on the right. NO.58 Refer to the exhibit.After configuration of the Cisco IM&P cluster in high-availability mode, both IM&P servers remain in the initializing state. Which two actions ensure normal operations of this IM&P high-availability cluster? (Choose two.)  Clear the Enable High Availability check box in the Presence Redundancy Group configuration.  Confirm that Cisco Presence Engine, Cisco XCP Router, and Cisco DB services are up and running on both IM&P servers.  Restart the Server Recovery Manager service in Cisco Unified Serviceability – Network Services on both IM&P servers.  Verify that the Cisco XCP SIP Federation Connection Manager service is running.  Ensure that an equal number of users are assigned to each IM&P server. NO.59 When Cisco IM and Presence is configured to use automatic fallback, how long does the Server Recovery Manager service wait for a failed service/server to remain active before an automatic fallback is initiated?  10 minutes  20 minutes  30 minutes  1 hour Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-im-presence-service/200958-IM-and-Presence-Server-High-Availability.htmlNO.60 A collaboration engineer is troubleshooting Cisco IM and Presence high availability. The system is version10.x. The engineer has confirneed that the server recovery manager service is configured using system defaults.The engineer notices that user sessions have not fallen back to the homed nodes. What is the cause this Issue?  The engineer did not click the Fallback button for the redundancy group  The user accounts were moved to the redundant server,  The failed service Of server was offline longer than the Client Re-Login upper Lint setting.  The failed service or server has not been active for at least 30 minutes. ExplanationThis option explains why the user sessions have not fallen back to the homed nodes after the failed service or server was restored. The Client Re-Login upper limit setting determines how long the Jabber clients will attempt to re-login to their homed nodes after a failover event. If the failed service or server is offline longer than this setting, the Jabber clients will stop trying to re-login and will remain on the backup node until the administrator manually initiates a fallback or recovery. The default value for this setting is 30 minutes, but it can be changed in the Server Recovery Manager Service Parameters. References:https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-imhttps://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/11_5_1/cuNO.61 Drag and drop the steps from the left into the correct order on the right that describes the flow of presence updates when a user manually sets the presence status in Cisco Jabber. Not all options are used. NO.62 Refer to the exhibit. A Cisco Jabber for windows users Is reporting an Issue with phone control. Which action will resolve this issue?  Change the privacy setting on the CSF device to “Off”.  Uncheck “logged into hunt group” on the user’s CSF device.  Create a device profile for the phone.  Add the standard CCM end users and standard CTl enabled permission groups for the user. NO.63 Which two child elements can be in an XMPP message stanza? (Choose two.)  <server/>  <error/>  <client/>  <body/>  <subject/> Explanation/Reference:NO.64 A collaboration engineer is configuring service discovery for Cisco Jabber clients with an on-premises Cisco IM and Presence deployment Clients on the corporate network are working Clients on the public internet cannot locate the corporate services What must the engineer configure to enable service discovery for these clients?  Option A  Option B  Option C  Option D NO.65 Refer to the exhibit.A customer reports that after a network failure, all of the Cisco Jabber clients are not switched back to their home nodes. An engineer determines that the primary Cisco IM and Presence server is in Failed Over state.Which two actions should be performed to bring the system back to operational state and to prevent future occurrences? (Choose two.)  Advise all users to re-login to their Jabber clients.  Confirm that both IM and Presence servers are configured in the Presence Redundancy Group configuration pane.  Perform a restart of the IM and Presence primary server to force fallback.  Click the Fallback button in the Server Action pane.  Set the Automatic Failover parameter in the Server Recovery Manager Service Parameters to the value True. NO.66 Which statement describes a role of AXL communications in the BLF Plug-in Service of the Cisco Unified Attendant Console?  The AXL communications allow registered attendants to log in to Cisco Unified Communications Manager and receive calls.  The AXL communications enable Device Resolution Manager to resolve the device statuses of operator and system devices.  The AXL communications is required after installation to verify that the specified CTI manager or managers and Cisco Unified Attendant Console versions match.  The AXL communications is required after installation to verify that the specified CTI manager or managers and Cisco Unified CM versions. “Part of the Cisco Unified Attendant Console Advanced BLF Plug-in service known as Device Resolution Manager (DRM) uses AXL to communicate with Cisco Unified Communications Manager. The AXL communications enable DRM to resolve the BLFs of operator and system devices, and to synchronize system devices within the Cisco Unified Communications Manager database.”https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuaca/12_0_4/admin_guide/CUACA_AG_120402.pdfNO.67 Refer to the exhibit.A customer reports that after a network failure, all of the Cisco Jabber clients are not switched back to their home nodes. An engineer determines that the primary Cisco IM&P server is in Failed Over state. Which two actions should be performed to bring the system back to operational state and to prevent future occurrences?(Choose two.)  Advise all users to re-login to their Jabber clients.  Confirm that both IM&P servers are configured in the Presence Redundancy Group configuration pane.  Perform a restart of the IM&P primary server to force fallback.  Click the Fallback button in the Server Action pane.  Set the Automatic Failover parameter in the Server Recovery Manager Service Parameters to the value True.  Loading … New Real 300-810 Exam Dumps Questions: https://www.actualtests4sure.com/300-810-test-questions.html --------------------------------------------------- Images: https://blog.actualtests4sure.com/wp-content/plugins/watu/loading.gif https://blog.actualtests4sure.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-11-29 13:32:38 Post date GMT: 2023-11-29 13:32:38 Post modified date: 2023-11-29 13:32:38 Post modified date GMT: 2023-11-29 13:32:38