This page was exported from Actual Test Materials [ http://blog.actualtests4sure.com ] Export date:Fri Nov 15 20:53:27 2024 / +0000 GMT ___________________________________________________ Title: 2024 NSE6_FWF-6.4 exam torrent NSE6_FWF-6.4 Study Guide [Q19-Q34] --------------------------------------------------- 2024 NSE6_FWF-6.4 exam torrent NSE6_FWF-6.4 Study Guide Easily pass NSE6_FWF-6.4 Exam with our Dumps & PDF Test Engine NEW QUESTION 19You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.Which configuration change will allow neighboring APs to be successfully detected?  Enable Locate WiFi clients when not connected in the relevant AP profiles.  Enable Monitor channel utilization on the relevant AP profiles.  Ensure that all allowed channels are enabled for the AP radios.  Enable Radio resource provisioning on the relevant AP profiles. ExplanationThe ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.NEW QUESTION 20Which statement describes FortiPresence location map functionality?  Provides real-time insight into user movements  Provides real-time insight into user online activity  Provides real-time insight into user purchase activity  Provides real-time insight into user usage stats This geographical data analysis provides real-time insights into user behavior.NEW QUESTION 21As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?  Configure the APs individually by overriding the settings in Managed FortiAPs  Configure the controller for the correct country code for Germany  Clone a suitable FortiAP profile and change the county code settings on the profile  Create a new FortiAP profile and change the county code settings on the profile NEW QUESTION 22Refer to the exhibits.Exhibit AExhibit BExhibit CA wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?  Increase the transmission power of the AP radios  Enable frequency handoff on the AP to band steer clients  Reduce the number of wireless networks being broadcast by the AP  Install another AP in the reception area to improve available bandwidth NEW QUESTION 23When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)  81 Tunnel-Private-Group-ID  65 Tunnel-Medium-Type  83 Tunnel-Preference  58 Egress-VLAN-Name  64 Tunnel-Type ExplanationThe RADIUS user attributes used for the VLAN ID assignment are:IETF 64 (Tunnel Type)-Set this to VLAN.IETF 65 (Tunnel Medium Type)-Set this to 802IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.NEW QUESTION 24Refer to the exhibit.What does the asterisk (*) symbol beside the channel mean?  Indicates channels that can be used only when Radio Resource Provisioning is enabled  Indicates channels that cannot be used because of regulatory channel restrictions  Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)  Indicates channels that are subject to dynamic frequency selection (DFS) regulations ExplanationThis frequencies are also used by other licensed applications, wireless LANs have to use a specific method to gain access to certain higher frequencies and this method is known as DFS.NEW QUESTION 25As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?  Create wireless LAN specific policies  Preauthorize APs  Create a custom AP profile  Set the wireless controller country setting NEW QUESTION 26You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.Which configuration change will allow neighboring APs to be successfully detected?  Enable Locate WiFi clients when not connected in the relevant AP profiles.  Enable Monitor channel utilization on the relevant AP profiles.  Ensure that all allowed channels are enabled for the AP radios.  Enable Radio resource provisioning on the relevant AP profiles. The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.NEW QUESTION 27What type of design model does FortiPlanner use in wireless design project?  Architectural model  Predictive model  Analytical model  Integration model ExplanationFortiPlanner is a wireless network planning and deployment tool that helps to design and optimize wireless networks based on various parameters, such as floor plans, AP models, coverage areas, and client density.FortiPlanner uses a predictive model in wireless design projects, which means that it estimates the wireless coverage and performance based on mathematical calculations and simulations, without requiring any physical measurements or site surveys. References: FortiOS 6.4.0 Handbook – Wireless Controller, page 5;[FortiPlanner User Guide], page 9.NEW QUESTION 28Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?  Security Fabric Connection  SSH  HTTPS  FortiTelemetry NEW QUESTION 29Refer to the exhibit.What does the asterisk (*) symbol beside the channel mean?  Indicates channels that can be used only when Radio Resource Provisioning is enabled  Indicates channels that cannot be used because of regulatory channel restrictions  Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)  Indicates channels that are subject to dynamic frequency selection (DFS) regulations NEW QUESTION 30Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)  A VAP configured for captive portal authentication  A VAP configured for WPA2 or 3 Enterprise  A VAP configured to authenticate locally on FortiGate  A VAP configured to authenticate using a radius server ExplanationIn the SSID choose WPA2-Enterprise authentication.WSSO is RADIUS-based authentication that passes the user’s user group memberships to the FortiGate.NEW QUESTION 31Refer to the exhibits.Exhibit AExhibit BExhibit CA wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and Io devices.Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?  Increase the transmission power of the AP radios  Enable frequency handoff on the AP to band steer clients  Reduce the number of wireless networks being broadcast by the AP  Install another AP in the reception area to improve available bandwidth NEW QUESTION 32Where in the controller interface can you find a wireless client’s upstream and downstream link rates?  On the AP CLI, using the cw_diag ksta command  On the controller CLI, using the diag wireless-controller wlac -d sta command  On the AP CLI, using the cw_diag -d sta command  On the controller CLI, using the WiFi Client monitor NEW QUESTION 33How are wireless clients assigned to a dynamic VLAN configured for hash mode?  Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN  Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs  Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool  Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.NEW QUESTION 34As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?  Create wireless LAN specific policies  Preauthorize APs  Create a custom AP profile  Set the wireless controller country setting ExplanationSetting the wireless controller country setting is a standard best practice that should be performed before configuring FortiAPs using a FortiGate wireless controller. The country setting determines the regulatory domain and the allowed channels and power levels for the wireless network. The country setting must match the physical location of the FortiAPs to comply with local regulations and avoid interference issues.References: Secure Wireless LAN Course Description, page 5; FortiOS 6.4.0 Handbook – Wireless Controller, page 24. Loading … NSE6_FWF-6.4 PDF Pass Leader, NSE6_FWF-6.4 Latest Real Test: https://www.actualtests4sure.com/NSE6_FWF-6.4-test-questions.html --------------------------------------------------- Images: https://blog.actualtests4sure.com/wp-content/plugins/watu/loading.gif https://blog.actualtests4sure.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-02-05 15:27:00 Post date GMT: 2024-02-05 15:27:00 Post modified date: 2024-02-05 15:27:00 Post modified date GMT: 2024-02-05 15:27:00