[2024] Use Valid New 500-470 Test Notes & 500-470 Valid Exam Guide [Q18-Q33]

[2024] Use Valid New 500-470 Test Notes & 500-470 Valid Exam Guide

500-470 Actual Questions Answers PDF 100% Cover Real Exam Questions

Q18. Which are three Cisco ISE use cases? (Choose three.)

 BYOD

 Assurance

 Monitoring

 Security Incident and Event Management

 Access Control

 Segmentation

Q19. Which three statements best describe Cisco ISE configuration capabilities? (Choose three.)

 ISE Deployment Assistant (IDA) is a built in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE)

 Cisco ISE includes wireless setup wizard and visibility wizard.

 ISE requires an understanding of the command line for set-up and configuration.

 ISE wizards and pre-canned configurations ease ISE roll-out significantly.

 Cisco Active Advisor provides additional guidance for ISE deployments

Q20. Which Cisco SD WAN component provides a secure data plane with remote vEdge routers?

 vManage

 vSmart

 vBond

 vEdge

Q21. Which party solution integrates with Cisco’s security and network portfolios within the ISE?

 25+ 3rdparty solutions

 20+ 3rdparty solutions

 30+ 3rdparty solutions

 45+ 3rdparty solutions

 60+ 3rdparty solutions

Q22. Which three technologies are used in an SD-Access Fabric? (Choose three.)

 MPLS

 TrustSec

 VXLAN

 OTV

 LISP

 RSVP

Q23. Which options are Network Access Device types?

 Switches, Wireless Controllers, and Routers

 Switches, Routers, and VPN Gateways

 Switches, Wireless Controllers, and VPN Gateways

 Wireless Controllers, Routers, and VPN Gateways

Explanation
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Campus/CVD-Software-Defined-Access-Design-Gu References := Some possible references are:
Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers (ENSDENG) Study Guide Cisco Identity Services Engine Administrator Guide, Release 2.7 – Configure Network Access Devices
[Cisco Identity Services Engine]

Q24. What is a challenge of having an SD-Access Centralized design where a single fabric encompasses the main site and all branch sites across the WAN?

 End to End Routing is not supported

 SSIDs would be the same across all sites

 DNA Center does not support it

 Since the traffic is encapsulated. SD-WAN features can’t be used to optimize/route traffic.

Q25. What is the default interval for BFD packets?

 5 Seconds

 10 Seconds

 15 Seconds

 1 Seconds

Explanation
https://www.cisco.com/en/US/technologies/tk648/tk365/tk207/technologies_white_paper0900 aecd80243fe7.html The default interval for BFD packets is 1 second. BFD uses Hello packets to detect the liveness and faults on a connection. BFD Hello Interval packet is sent at the default interval of 1000 milliseconds on all connections1. This command can be used to change the hello interval for a transport color. The interval for transmitting and receiving BFD packets can also be configured on the interface level or the BFD session level, depending on the device and the protocol234. The BFD detection time is calculated as the product of the local detection multiplier and the agreed remote transmission interval. The lower the BFD detection time, the faster the BFD session can detect a fault. However, a lower BFD detection time also consumes more system resources and bandwidth. Therefore, the BFD detection time should be configured according to the network situation and performance requirements. References:
1: Bidirectional Forwarding Detection – Cisco
2: Configuring the BFD Detection Time – CloudEngine 16800 … – Huawei
3: Cisco IOS XE Catalyst SD-WAN Qualified Command Reference
4: bfd min-echo-receive-interval – Aruba

Q26. Which protocol is used between an Endpoint and a Switch with an 802.1 authentication?

 RADIUS

 EAP

 MAB

 TACACS

Q27. Which workflow is necessary for setting up a network hierarchy?

 Provision

 Design

 Policy

 Assurance

Q28. What is an example of Correlated Insights for SDA and Switching?

 Control Plane Reachability

 Roaming Pattern Analysis

 AP License Utilization

 Excessive Onboarding Time

Explanation
https://www.ciscolive.com/c/dam/r/ciscolive/latam/docs/2017/pdf/BRKEWN-2032.pdf

Q29. Where does the Cisco V-Edge Router perform QOS traffic classification?

 Ingress interface

 Per vEdge

 Egress interface

 Per VPN

Explanation
The Cisco V-Edge Router performs QoS traffic classification on the ingress interface, before the traffic enters the VPN. The classification is based on the match criteria specified in the access lists, which can include the source and destination IP addresses, ports, protocols, DSCP values, and application-aware NBAR attributes.
The classification results in assigning a forwarding class and a QoS group to each packet. The forwarding class determines the output queue and the scheduling policy for the packet on the egress interface. The QoS group is an internal label that can be used to remark the DSCP value of the packet or to match the packet in another access list for further processing. References:
Forwarding and QoS Configuration Guide for vEdge Routers, Cisco SD-WAN Release 20, Chapter 2:
Configuring Localized Data Policy,
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/qos/vEdge-20-x/qos-book/localized-da Cisco SD-WAN Design Guide, Release 20, Chapter 6: Quality of Service,
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/SDWAN/2020/b_SD-WAN_Design_Guide_Aug_2

Q30. How does identity management solve two customer problems? (Choose two.)

 Enables and enforces 802.1X across the network platform

 Increases digitization

 Manages group membership

 Provides network visibility and security

 Achieves dynamic and adaptive network segmentation

Explanation
Identity management is the practice of making sure that people and entities with digital identities have the right level of access to enterprise resources like networks and databases. User roles and access privileges are defined and managed through an identity management system, such as Cisco Identity Services Engine (ISE)1.
Identity management solves two customer problems:
Provides network visibility and security: Identity management allows customers to see who and what is on their network, and to control their access based on policies and context. Identity management also integrates with other security solutions, such as Cisco Firepower, Cisco Stealthwatch, or Cisco Umbrella, to detect and respond to threats, and to enforce adaptive network access policies based on the threat level of the endpoints2.
Achieves dynamic and adaptive network segmentation: Identity management enables customers to segment their network based on the identity and context of the users and devices, rather than the IP addresses and VLANs. This allows customers to implement a zero-trust model, where only trusted users and devices can access the resources they need, and where the access policies can be dynamically updated based on the changing conditions and requirements. Identity management also supports Cisco TrustSec, which is a technology that assigns scalable group tags (SGTs) to endpoints and enforces group-based policies (contracts) across the network3.
References:
1: [What Is Identity Access Management (IAM)? – Cisco

Q31. Which two options are SD-WAN solution capabilities? (Choose two.)

 Ability to provide and integrate security with complementary products and applications

 The separation of management plane, control plane and data plane to enable horizontal scaling

 Truck roll branch turn up for easy provisioning and new installations

 Cloud hosted or on-Premise fully redundant management and control plane functions

Q32. Which options are Network Access Device types?

 Switches, Wireless Controllers, and VPN Gateways

 Wireless Controllers, Routers, and VPN Gateways

 Switches, Wireless Controllers, and Routers

 Switches, Routers, and VPN Gateways

Q33. Which three wireless product families are supported in the current DNA-C 1.1 release? (Choose three.)

 AP 1260

 WLC 8540

 WLC 5508

 AP 3800

 WLC 3504

 Loading …

Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers 500-470 Exam

Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers 500-470 Exam which is related to Cisco Advanced Enterprise Networks Architecture Specialization. This exam validates the Candidate ability to utilize main and important Cisco Collaboration and Cisco Unified Communication and compare the limitation of traditional equipment and the advantages of the Cisco Collaboration Architecture.

Cisco 500-470 exam consists of multiple-choice questions and simulations that test skills and knowledge related to SDA, SDWAN, and ISE. 500-470 exam covers topics such as network design, implementation, troubleshooting, and security for these technologies. Candidates who pass the exam will demonstrate their ability to design and implement solutions using Cisco's suite of products and technologies related to SDA, SDWAN, and ISE. Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers certification is highly respected in the industry and can help network engineers advance their careers and earn higher salaries.

Cisco 500-470 exam is an essential certification for system engineers who are looking to advance their careers in the field of enterprise networking. Cisco Enterprise Networks SDA, SDWAN and ISE Exam for System Engineers certification is recognized globally and is highly valued by employers. It is also a prerequisite for several other Cisco certifications, including the CCNP Enterprise certification.

500-470 Exam questions and answers: https://www.actualtests4sure.com/500-470-test-questions.html ¹

1. https://www.actualtests4sure.com/500-470-test-ques tions.html