[2024] Get Top-Rated NACE NACE-CIP2-001 Exam Dumps Now [Q38-Q53] : Actual Test Materials : http://blog.actualtests4sure.com

NEW QUESTION 38
Application of Thermal Spray Coatings requires:

The same skills as liquid coatings

Specialized skills supported by training and experience

No particular skills

The same skills as welding

NEW QUESTION 39
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project. You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot found.
You FIRST preferred course of action is to:

Use creative writing to cover over the fact they are missing

Plainly state in your report that they are missing

Do not complete your report until they can be found

Re-create the reports as not much was going on during night shift anyway

NEW QUESTION 40
Dehumidification is defined as the removal of moisture vapor from the air to

provide worker comfort.

lower its temperature

raise its relative humidity.

lower its dew point,

NEW QUESTION 41
When performing inspection in accordance with ASTM D 4138 the Inspector will use:

A set of 14 pencils of varying hardness

A destructive paint inspection Tooke gauge

A mechanical adhesion tester

A hardness tester

NEW QUESTION 42
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?

Gathering

Midstream

Transmission

Distribution

NEW QUESTION 43
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:

Cost

Iron content

Appearance

Safety

NEW QUESTION 44
NACE Standards include:

Standard Practices

Material Requirements

a) & b)

a) only

NEW QUESTION 45
Corrosion is the reverse process of

hot dipping.

steel manufacturing.

flaking.

galvanic deterioration.

NEW QUESTION 46
NACE Level 2 Inspectors have been authorized to perform:

All types of inspection without supervision

Visual inspection and Non-destructive testing

Visual inspection, Non-Destructive and Destructive testing

Visual inspection only

NEW QUESTION 47
Centrifugal blast cleaning requires:

A large volume of air to propel the abrasive

Very large nozzles

Well maintained blast wheels

The use of single use abrasives

NEW QUESTION 48
Coating Surveys are legally required:

On commercial marine vessels and offshore platforms

On high pressure gas lines and fireproofed structures

On water tanks and potable water pipelines

On food and beverage vessels and can linings

NEW QUESTION 49
In which type of concrete are laitance commonly encountered?

Concrete block (poured with a form)

Gunite

Glass fiber cement

Poured (wet cast)

NEW QUESTION 50
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires

25 single rubs with a saturated cloth.

35 single rubs with a saturated cloth.

50 double rubs with a saturated cloth.

25 double rubs with a saturated cloth.

NEW QUESTION 51
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?

Sacking

Acid etching

Stoning

High-pressure water washing

NEW QUESTION 52
When observing fabrication defects the NACE Inspector should:

Require they be corrected prior to coating

Consult the specification to determine how they should be treated

Stop the job immediately

Write an NCR and call the fabricator

NEW QUESTION 53
Coating surveys may include which steps?
Select All That Apply:

Develop a survey plan

Summarize the collected data

Schedule the remedial work

Evaluate the coatings performance