Pass VMware 2V0-41.24 Exam With Practice Test Questions Dumps Bundle [Q22-Q40] : Actual Test Materials : http://blog.actualtests4sure.com

NEW QUESTION 22
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?

set cli-timeout 1

set cli-timeout enabled

set cli-timeout disabled

set cli-timeout 0

NEW QUESTION 23
What must be configured on Transport Nodes for encapsulation and decapsulation of Geneve protocol?

VXIAN

UDP

STT

TEP

NEW QUESTION 24
Which two statements describe the characteristics of an Edge Cluster in NSX? (Choose two.)

Can have a maximum of 10 edge nodes

Can have a maximum of 8 edge nodes

Can contain multiple types of edge nodes (VM or bare metal)

Must contain only one type of edge nodes (VM or bare metal)

Must have only active-active edge nodes

NEW QUESTION 25
An administrator needs to download the support bundle for NSX Manager.
Where does the administrator download the log bundle from?

System > Utilities > Tools

System > Support Bundle

System > Settings > Support Bundle

System > Settings

NEW QUESTION 26
Which two statements are correct about East-West Malware Prevention? (Choose two.)

A SVM is deployed on every ESXi host.

NSX Application Platform must have Internet access.

An agent must be installed on every ESXi host.

An agent must be installed on every NSX Edge node.

NSX Edge nodes must have Internet access.

NEW QUESTION 27
Which three of the following describe the Border Gateway Routing Protocol (BGP) configuration on a Tier-0 Gateway? (Choose three.)

Can be used as an Exterior Gateway Protocol.

It supports a 4-byte autonomous system number.

The network is divided into areas that are logical groups.

EIGRP Is disabled by default.

BGP is enabled by default.

NEW QUESTION 28
Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

Tier-1 SR Router Port

Tier-0 Uplink interface

Downlink Interface for the Tier-0 DR

Downlink Interface for the Tier-1 DR

Inter-Tier interface on the Tier-0 gateway

NEW QUESTION 29
HOTSPOT
Refer to the exhibit.
Which two items must be configured to enable OSPF for the Tler-0 Gateway in the Image? Mark your answers by clicking twice on the image.

NEW QUESTION 30
Match the NSX Intelligence recommendations with their correct purpose.

NEW QUESTION 31
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)

net-dvs

esxcfg-nics -l

esxcli network ip interface ipv4 get

esxcfg-vmknic -l

esxcli network nic list

NEW QUESTION 32
Which NSX CLI command is used to change the authentication policy for local users?

Set cli-timeout

Get auth-policy minimum-password-length

Set hardening- policy

Set auth-policy

NEW QUESTION 33
Which of the following settings must be configured in an NSX environment before enabling stateful active-active SNAT?

Tier-1 gateway in active-standby mode

Tier-1 gateway in distributed only mode

An Interface Group for the NSX Edge uplinks

A Punting Traffic Group for the NSX Edge uplinks

NEW QUESTION 34
Which table on an ESXi host is used to determine the location of a particular workload for a frame-forwarding decision?

Routing Table

ARP Table

TEP Table

MAC Table

NEW QUESTION 35
A company security policy requires all users to log into applications using a centralized authentication system.
Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

RSA SecureID

SecureDAP

RADII 2.0

LDAP and OpenLDAP based on Active Directory (AD)

Keygen Enterprise

NEW QUESTION 36
An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI.
What two are the prerequisites for this configuration? (Choose two.)

All nodes must be in separate subnets.

The cluster configuration must be completed using API.

NSX Manager must reside on a Windows Server.

All nodes must be in the same subnet.

A compute manager must be configured.

NEW QUESTION 37
Which command on ESXi is used to verify the Local Control Plane connectivity with Central Control Plane?

esxcli network ip connection list | grep netcpa

esxcli network ip connection list | grep ccpd

esxcli network ip connection list | grep 1234

esxcli network ip connection list | grep 1235

NEW QUESTION 38
What are two supported host switch modes? (Choose two.)

Overlay Datapath

Secure Datapath

Standard Datapath

Enhanced Datapath

DPDK Datapath

NEW QUESTION 39
As part of an organization’s IT security compliance requirement, NSX Manager must be configured for 2FA (two-factor authentication).
What should an NSX administrator have ready before the integration can be configured? O

Active Directory LDAP integration with OAuth Client added

VMware Identity Manager with an OAuth Client added

Active Directory LDAP integration with ADFS

VMware Identity Manager with NSX added as a Web Application

NEW QUESTION 40
Match the NSX Intelligence recommendations with their correct purpose.

Pass VMware 2V0-41.24 Exam With Practice Test Questions Dumps Bundle [Q22-Q40]

VMware 2V0-41.24 Exam Syllabus Topics: