[Oct 15, 2026] New Real HPE7-A02 Exam Dumps Questions [Q37-Q51]

Rate this post

[Oct 15, 2026] New Real HPE7-A02 Exam Dumps Questions

Pass Your HPE7-A02 Exam Easily with Accurate Aruba Certified Network Security Professional Exam PDF Questions

HP HPE7-A02 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Troubleshooting and Optimization	4%	– Performance and security optimization – Security feature troubleshooting
Topic 2: Secure Wired AOS-CX Infrastructure	19%	– Device hardening and secure management – Wired authentication and access control – Dynamic segmentation and group-based policy
Topic 3: Endpoint Visibility and Posture Assessment	8%	– BYOD and onboarding solutions – Posture validation and remediation – Device classification and profiling
Topic 4: Secure WAN and Edge Security	7%	– ZTNA and Security Service Edge (SSE) – Edge security and remote access – IPsec and secure tunneling
Topic 5: Threat Detection and Incident Response	9%	– Threat analysis and forensics – Alerts and mitigation workflows – Security monitoring and event correlation
Topic 6: Security Terminology and Zero Trust Framework	26%	– Security policies and compliance – Network security concepts and threats – Zero Trust architecture and Aruba ESP
Topic 7: Secure WLAN Implementation	12%	– WLAN authentication methods (802.1X, EAP, MPSK) – Secure mobility and role-based access – AAA integration with ClearPass Policy Manager
Topic 8: ClearPass Policy Manager Advanced Configuration	15%	– Certificate management and PKI integration – Cluster design and high availability – REST API, OAuth and external systems integration

Q37. HPE Aruba Networking Central displays an alert about an Infrastructure Attack that was detected. You go to the Security > RAPIDS events and see that the attack was “Detect adhoc using Valid SSID.” What is one possible next step?

Make sure that you have tuned the threshold for that check as false positives are common for it.

Make sure that clients have updated drivers, as faulty drivers are a common explanation for this attack type.

Use HPE Aruba Networking Central floorplans or the detecting AP identities to locate the general area for the threat.

Look for the IP address associated with the offender and then check for that IP address among HPE Aruba Networking Central clients.

Q38. You need to set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to provide certificate-based authentication of 802.1X supplicants.
How should you upload the root CA certificate for the supplicants ‘ certificates?

As a ClearPass Server certificate with the RADIUS/EAP usage

As a Trusted CA with the AD/LDAP usage

As a Trusted CA with the EAP usage

As a ClearPass Server certificate with the Database usage

Q39. What is a typical use case for using HPE Aruba Networking ClearPass Onboard to provision devices?

Enabling unmanaged devices to succeed at certificate-based 802.1X

Enabling managed Windows domain computers to succeed at certificate-based 802.1X

Enhancing security for loT devices that need to authenticate with MAC-Auth

Enforcing posture-based assessment on managed Windows domain computers

Q40. HPE Aruba Networking Central displays an alert about an Infrastructure Attack that was detected.
You go to the Security > RAPIDS events and see that the attack was “Detect adhoc using Valid SSID.” What is one possible next step?

Make sure that you have tuned the threshold for that check as false positives are common for it.

Make sure that clients have updated drivers, as faulty drivers are a common explanation for this attack type.

Use HPE Aruba Networking Central floorplans or the detecting AP identities to locate the general area for the threat.

Look for the IP address associated with the offender and then check for that IP address among HPE Aruba Networking Central clients.

Q41. An admin has configured an AOS-CX switch with these settings:
port-access role employees
vlan access name employees
This switch is also configured with CPPM as its RADIUS server.
Which enforcement profile should you configure on CPPM to work with this configuration?

HPE Aruba Networking Downloadable Role Enforcement type with gateway role name set to
“employees”

RADIUS Enforcement type with Aruba-User-Role VSA set to “employees”

HPE Aruba Networking Downloadable Role Enforcement type with role name set to “employees”

RADIUS Enforcement type with HPE-User-Role VSA set to “employees”

Q42. A company assigns a different block of VLAN IDs to each of its access layer AOS-CX switches. The switches run version 10.07. The IDs are used for standard purposes, such as for employees, VolP phones, and cameras. The company wants to apply 802.1X authentication to HPE Aruba Networking ClearPass Policy Manager (CPPM) and then steer clients to the correct VLANs for local forwarding.
What can you do to simplify setting up this solution?

Assign consistent names to VLANs of the same type across the AOS-CX switches and have user-roles reference names.

Use the trunk allowed VLAN setting to assign multiple VLAN IDs to the same role.

Change the VLAN IDs across the AOS-CX switches so that they are consistent.

Avoid configuring the VLAN in the role; use trunk VLANs to assign multiple VLANs to the port instead.

Q43. HPE Aruba Networking ClearPass Device Insight (CPDI) could not classify some endpoints using system and user rules. Using machine learning, it did assign those endpoints to a cluster and discover a recommendation.
In which of these circumstances does CPDI automatically classify the endpoints based on that recommendation?

The recommendation has 96% confidence, and it is based on 13 classified devices.

The recommendation has 98% confidence, and it is based on 5 classified devices.

The recommendation has 93% confidence, and it is based on 36 classified devices.

The recommendation has 100% confidence, and it is based on 4 classified devices.

Q44. A company has HPE Aruba Networking gateways that implement gateway IDS/IPS. Admins sometimes check the Security Dashboard, but they want a faster way to discover if a gateway starts detecting threats in traffic.
What should they do?

Set up Webhooks that are attached to the HPE Aruba Networking Central Threat Dashboard.

Use Syslog to integrate the gateways with HPE Aruba Networking ClearPass Policy Manager (CPPM) event processing.

Set up email notifications using HPE Aruba Networking Central’s global alert settings.

Integrate HPE Aruba Networking ClearPass Device Insight (CPDI) with Central and schedule hourly reports.

1. The Need for Faster Threat Notifications
Admins need immediate alerts when threats are detected by the gateway’s IDS/IPS functionality. Regularly checking the Security Dashboard is inefficient, so an automated notification system is essential for faster response times.
2. Explanation of Each Option
A: Set up Webhooks that are attached to the HPE Aruba Networking Central Threat Dashboard:
* Incorrect:
* Webhooks are useful for integrating alerts with third-party tools or custom workflows. However, setting up email notifications through global alert settings is faster and simpler for this purpose.
B: Use Syslog to integrate the gateways with HPE Aruba Networking ClearPass Policy Manager (CPPM) event processing:
* Incorrect:
* Syslog integration with CPPM is typically used for logging and correlating events, not for real- time notifications about threats.
* CPPM is better suited for policy enforcement, not instant threat alerts.
C: Set up email notifications using HPE Aruba Networking Central’s global alert settings:
* Correct:
* HPE Aruba Networking Central has global alert settings that allow admins to configure email notifications for specific events, such as threat detection.
* This is the simplest and most effective way to ensure admins receive immediate notifications when threats are detected by the gateways.
D: Integrate HPE Aruba Networking ClearPass Device Insight (CPDI) with Central and schedule hourly reports:
* Incorrect:
* While CPDI integration provides enhanced device profiling, it is not directly tied to gateway IDS
/IPS threat detection.
* Hourly reports are not real-time notifications and would not meet the requirement for faster threat alerts.
Final Recommendation
Setting up email notifications through HPE Aruba Networking Central’s global alert settings provides the most direct and efficient solution for immediate threat detection alerts.
References
* HPE Aruba Networking Central Alert Management Documentation.
* Aruba IDS/IPS and Security Dashboard Configuration Guide.
* Email Notification Setup for Aruba Central Threat Alerts.

Q45. A company uses HPE Aruba Networking APs running AOS-10, HPE Aruba Networking Central, and HPE Aruba Networking ClearPass Policy Manager (CPPM). After starting to implement TEAP to authenticate wireless clients, admins notice that all clients are showing up on APs and in HPE Aruba Networking Central with the “anonymous” username. They want to see users’ actual names there.
What can they do to address this issue?

On CPPM, edit the AD authentication source and add a custom attribute that collects the username.

Configure the HPE Aruba Networking Central group settings to enable deep packet inspection and firewall visibility on all HPE Aruba Networking APs.

Have CPPM apply an additional RADIUS enforcement profile to authenticated clients, which specifies the TEAP Method 2 username.

On the APs, make sure that RADIUS proxy is disabled. Also ensure that all APs are added as network devices on CPPM.

Q46. Refer to the exhibits.

HPE Aruba Networking ClearPass Policy Manager (CPPM) is authenticating 802.1X clients using Active Directory as the source. CPPM has a custom attribute for AD that uses AccountStatus as userAccountControl.
Which enforcement profile does CPPM apply to a client that:
Succeeds in authenticating to an active AD user account:
userAccountControl = 512
Does not succeed at authenticating as a computer

profile3

profile1

Deny Access Profile

profile2

Q47. A company lacks visibility into the many different types of user and loT devices deployed in its internal network, making it hard for the security team to address those devices.
Which HPE Aruba Networking solution should you recommend to resolve this issue?

HPE Aruba Networking Mobility Conductor

HPE Aruba Networking ClearPass Device Insight (CPDI)

HPE Aruba Networking Network Analytics Engine (NAE)

HPE Aruba Networking ClearPass OnBoard

Q48. An admin has configured an AOS-CX switch with these settings:
port-access role employees
vlan access name employees
This switch is also configured with CPPM as its RADIUS server.
Which enforcement profile should you configure on CPPM to work with this configuration?

RADIUS Enforcement type with HPE-User-Role VSA set to ” employees “

HPE Aruba Networking Downloadable Role Enforcement type with role name set to ” employees “

HPE Aruba Networking Downloadable Role Enforcement type with gateway role name set to ” employees “

RADIUS Enforcement type with Aruba-User-Role VSA set to ” employees “

Q49.

You have downloaded a packet capture that you generated on HPE Aruba Networking Central. When you open the capture in Wireshark, you see the output shown in the exhibit.
What should you do in Wireshark so that you can better interpret the packets?

Choose to decode UDP port 5555 packets as ARUBA_ERM and set the Aruba ERM Type to 0.

Edit preferences for IEEE 802.11 and chose to ignore the Protection bit with IV.

Apply the following display filter: wlan.fc.type == 1.

Edit the Enabled Protocols and make sure that 802.11, GRE, and Aruba_ERM are enabled.

Q50. A company wants you to integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI).
What is one aspect of the integration that you should explain?

CPPM no longer supports any Device Profiler features and relies on CPDI for this profile information.

CPDI must be configured as an audit server on CPPM for the integration to be successful.

CPDI must have security analysis disabled on it for the integration to be successful.

CPPM can submit profile information to CPDI, but if CPDI derives a different classification, CPDI takes precedence.

Q51.

You have downloaded a packet capture that you generated on HPE Aruba Networking Central. When you open the capture in Wireshark, you see the output shown in the exhibit.
What should you do in Wireshark so that you can better interpret the packets?

Choose to decode UDP port 5555 packets as ARUBA_ERM and set the Aruba ERM Type to 0.

Edit preferences for IEEE 802.11 and chose to ignore the Protection bit with IV.

Apply the following display filter: wlan.fc.type == 1.

Edit the Enabled Protocols and make sure that 802.11, GRE, and Aruba_ERM are enabled.

Updated HPE7-A02 Exam Practice Test Questions: https://www.actualtests4sure.com/HPE7-A02-test-questions.html

Actual Test Materials

[Oct 15, 2026] New Real HPE7-A02 Exam Dumps Questions [Q37-Q51]

Byadmin

HP HPE7-A02 Exam Syllabus Topics:

By admin

Related Post

[Sep 09, 2026] Latest HP HPE7-A02 Exam Practice Test To Gain Brilliante Result [Q63-Q79]

[Q30-Q51] Exam HPE6-A88 Realistic Dumps Verified Questions Free [Sep 06, 2026]

HPE Product Certified Real Exam Questions and Answers FREE HPE2-N71 Updated on May 24, 2026 [Q54-Q69]

Leave a Reply Cancel reply

you might like

[Oct 15, 2026] New Real HPE7-A02 Exam Dumps Questions [Q37-Q51]

Palo Alto Networks CloudSec-Pro Deluxe Study Guide with Online Test Engine [Q154-Q174]

[Q79-Q101] View 1Z0-1048-25 Exam Question Dumps With Latest Demo [Oct 13, 2026]

Updated Free Databricks Databricks-Certified-Data-Analyst-Associate Test Engine Questions with 118 Q&As [Q34-Q57]

Actual Test Materials