[Q54-Q74] 100% Guaranteed Results 352-001 Unlimited 270 Questions [2022]

Rate this post

100% Guaranteed Results 352-001 Unlimited 270 Questions [2022]

352-001 Dumps PDF – Want To Pass 352-001 Fast

352-001 Exam topics

Candidates must know the exam topics before they start of preparation. Because it will really help them in hitting the core. Our 352-001 exam dumps will include the following topics:

Evolving Technologies v1.1 10%
Layer 2 Control Plane 24%
Design Considerations 18%
Layer 3 Control Plane 33%
Network Virtualization 15%

The benefit in Obtaining the 352-001 Exam Certification

Cisco Certified Network Professional will be confident and stand different from others as their skills are more trained than non-certified professionals.
Cisco Certified Network Professional is distinguished among competitors. Cisco Certified Design Expert certification can give them an edge at that time easily when candidates appear for a job interview employers seek to notify something which differentiates the individual to another.
Cisco Certified Network Professional Certifications provide opportunities to get a job easily in which they are interested in instead of wasting years and ending without getting any experience.
Cisco Certified Network Professional have the knowledge to use the tools to complete the task efficiently and cost effectively than the other non-certified professionals lack in doing so.
Cisco Certified Network Professional Certification provides practical experience to candidates from all the aspects to be a proficient worker in the organization.

What is the duration of the 352-001 Exam

Format: Multiple choices, multiple answers
Passing Score: 70%
Length of Examination: 120 minutes
Number of Questions: 90-110

NO.54 Refer to the exhibit.

A customer runs OSPF with Area 5 between its aggregation router and an internal router. When a network change occurs in the backbone, Area 5 starts having connectivity issues due to the SPF algorithm recalculating an abnormal number of times in Area 5. You are tasked to redesign this network to increase resiliency on the customer network with the caveat that Router B does not support the stub area. How can you accomplish this task?

Set Area 5 to stubby at the ABR anyway.

Increase the bandwidth on the connection between Router A and Router B.

Turn on LSA throttling on all devices in Area 5.

Implement LSA filtering on the ABR, allowing summary routes and preventing more specific routes into Area 5.

Create a virtual link to Area 0 from Router B to the ABR.

NO.55 Refer to the exhibit.

You are a network designer who is given these design requirements:
Multicast services must be provided for Layer 3 VPN customers
The same forwarding technology must be used as Layer 3 VPN unicast packets Replication of multicast traffic is not allowed on the ingress PE Which multicast VPN technology conforms to the design requirements?

Multipoint-to-point LDP

MSDP

MLDP VPN

Rosen Draft using LDP

NO.56 A mobile network operator is designing an NGN backhaul and plans to migrate their legacy SDH and SONET-based transport network. The NGN network must achieve similar failover and failback times as the legacy network (50 milliseconds). Which method does allow for similar failover and failback times on the new packet-based network?

BPDU

E-OAM

BFD

UDLD

Explanation/Reference:
Explanation:
References:

NO.57 Drag and drop the optical technology design characteristics on the left to the correct optical technologies on the right. Not all options are used

NO.58 Drag and drop the characteristics of the DMVPN technology from the left to the right.

NO.59 You have been hired by a startup company to provide optical services using MPLS-TP.
Which three options describe reasons to use the MPLS-TP standard in your design?
(Choose three.)

MPLS-TP is a newer packet transport technology that replaces SONET/SDH.

MPLS-TP includes extensions to native MPLS OAM for fault detection, monitoring, and propagation.

MPLS-TP requires a routing protocol.

MPLS-TP uses an IANA assigned label 13 for OAM.

MPLS-TP uses Ethernet Y.1731 OAM.

NO.60 There are two hub-and-spoke networks in the following exhibit. Each has about 60 branches spread over a wide area. Connect routers P4S-RE and P4S-RF to two different frame providers. Problems with one provider have impacted branches connected to the other provider and reaching the data center.
Which is the best place to build flooding domain boundaries to isolate these WAN issues?

at routers P4S-RB and P4S-RC, because this will provide a good balance between separating the complex topologies behind routers P4S-RD, P4S-RE, and P4S-RF from the core and good route aggregation

at routers P4S-RB and P4S-RF, because this will provide good route aggregation and prevent routing along suboptimal paths in the case of link failure

at router P4S-RA, because this will provide optimal route aggregation and prevent suboptimal routing in the case of link failure

at routers P4S-RD, P4S-RE, and P4S-RF, because this will provide good route aggregation and also separate complex topologies within the network from one another

Section: (none)
Explanation/Reference:

NO.61 A company requests that you consult with them regarding the design of their production, development, and test environments. They indicate that the environments must communicate effectively, but they must be kept separate due to the inherent failures on the development network. What will be configured on the links between the networks to support their design requirements?

IBGP

EBGP

OSPF

static routes

NO.62 What are two benefits of using BFD for failure detection in the design of a network? (Choose two.)

BFD can provide failure detection in less than one second.

BFD can be used as a generic and consistent failure detection mechanism for EIGRP, IS-IS, and OSPF.

BFD eliminates router protocol hello notification.

BFD can be used for all types of network interfaces.

BFD is independent of the network protocol.

NO.63 Refer to the exhibit.
This Layer 2 network is expected to add 150 VLANs over the next year, in addition to the existing 50 VLANs within the network. Which STP type will support this design requirement using the least amount of CPU resources and achieving load-balancing?

RSTP

MST

PVST+

CST

NO.64 A service provider would like to maximize forwarding memory, routing memory, and CPU resources on PE devices for enterprise customers having very few sites (two to three) and a large number of prefixes (several thousand). Which service should be offered by the service provider to these customers?

VPWS

InterAS L3VPN

VPLS

L3VPNs (RFC 2547-based)

Section: (none)
Explanation/Reference:

NO.65 Refer to the exhibit ACME Mining has four data centres in Santiago, Cape town, Mumbai, and Beijing, full-mesh connected via a 400 Mb/s EVP-LAN. They want to deploy a new mission-critical application with these requirements
* cluster heartbeat 2 Mb/s continuous (250 KB/s)
* cluster heartbeat one-way maximum latency 100 ms
These are the current ping tests results between the four data centers:

Which hosting data center pair can host the new application?

Santiago and Cape Town

Cape Town and Mumbai

Mumbai and Beijing

Santiago and Beijing

Cape Town and Beijing

Santiago and Mumbai

NO.66 Which two options are considered risks or concerns when both the Internet and VPN service functions are on the same PE router? (Choose two.)

Internet-based attacks can affect VPN customers.

BGP cannot simultaneously run on the PE router that runs MPLS.

MP-BGP prefixes increase routers’ global routing tables, which affects network convergence.

Failure on the PE router affects both VPN and Internet services.

Customer performance can be affected by VPN traffic if Internet-based traffic is not prioritized on the P

NO.67 Refer to the exhibit. All routers in this network are configured to place all interfaces in OSPF area 5. R3 is the designated router on the 10.1.5.0/24 network. If you examine the OSPF database on R4, what would the network (type 2) LSA, generated by R3, contain?

a connection to 10.1.5.0/24 and links to R3, R2, and R1

a connection to 10.1.5.0/24 and links to R2 and R1

connections to 10.1.5.0/24 and 10.1.1.0/31

no connections, R3 does not generate a network (type 2) LSA in this network

NO.68 You have designed a network to support two offices connected by a T1. Your router serial interfaces will be configured with encapsulation PPP. What will happen to your EIGRP neighbors if there is an LCP failure once your network is implemented?

Your neighbors will drop after the EIGRP timers expire.

Your neighbors will stay up because the link has not gone down.

Your neighbors will drop immediately.

Your neighbors will drop and EIGRP will begin the query process.

NO.69 A company supports IPv4 and IPv6 addresses, and they need to be able to support flow-based translations for multiple IPv6 devices to a single IPv4 address. Which address family translation design solution should be recommended?

stateful NAT-PT

NAT-PT

stateless NAT64

stateful NAT64

NO.70 In Layer 2 access campus design, which mechanism should be enabled on access ports to protect the campus network from undesired access switches and looped ports?

root guard

EtherChannel guard

BPDU guard

loop guard

NO.71 What are three tools for ongoing monitoring and maintenance of a voice and video environment? (Choose three.)

active monitoring via synthetic probes to measure loss, latency, and jitter

passive monitoring via synthetic probes to measure loss, latency, and jitter

flow-based analysis to measure bandwidth mix of applications and their flows

flow-based analysis with PTP time-stamping to measure loss, latency, and jitter

call management analysis to identify CAC failures and call quality issues

NO.72 A company wants to use SSM as the multicast routing protocol inside its network. Some of its multicast applications do not support IGMPv3. In which two ways can the mapping be done when these applications send IGMPv2 join messages? (Choose two.)

The Layer 2 switches can send a request to a DNS server.

The Layer 3 multicast routers can send a request to a DNS server.

The mapping can be done statically at the Layer 2 switches.

The mapping can be done statically at the Layer 3 multicast routers.

The Layer 2 switches can transform the IGMPv2 join to an IGMPv3lite join.

The Layer 3 multicast routers can transform the IGMPv2 join to an IGMPv3lite join.

NO.73 As part of the network design, ACME Corporation requires the ability to export IPv6 information to better manage its network. Which version of NetFlow records is required to export this information?