[Nov-2024] Dumps Practice Exam Questions Study Guide for the 220-1101 Exam [Q124-Q141]

NEW QUESTION 124
The Wi-Fi network in the office is experiencing slow connection speeds. Which of the following should the technician check first on the access point?

Transmit power settings

Security settings

Firmware version

Location

NEW QUESTION 125
A technician needs to determine where a printer is connected on a patch panel. Which of the following is the best tool for the technician to use tolocate the port?

Toner probe

Loopback plug

Cable tester

Wi-Fi analyzer

NEW QUESTION 126
Vertical streaks are appearing on the output of a laser printer. Which of the following items is the MOST likely cause?

Roller

Drum

Transfer belt

Ribbon

NEW QUESTION 127
A technician responds to a user who has reported that a laptop is too hot. The technician notices the laptop is not able to sit level on the workspace. What of the following BEST describes the issue with the laptop?

The docking station is improperly installed.

The hard drive is disconnected.

The CPU fan is too powerful.

The battery is damaged.

NEW QUESTION 128
A natural disaster occurred, and the storage system for the development team is unrecoverable. The technician is preparing replacement storage arrays that include a hypervisor with the capacity to support several virtual machines. Two separate bays are available, and both should be utilized.
Requirements for the primary array include the following:
* No need to be scalable
* Very fast on reads
* Fault tolerance of one drive
* Ability to function with only one drive
* Easily recoverable data
* High redundancy
* Minimum number of drives
Requirements for the secondary array include the following:
* Fault tolerance of one drive
* Total space of 600G3
* Best write performance
* Minimum number of drives
Instructions:
Drag and Drop the appropriate Hard Drives. Then Open each array to complete the configuration.

NEW QUESTION 129
Upon booting a workstation, a technician hears a distinct clicking sound after power is applied to the motherboard. Which of the following would MOST likely be the cause?

RAID

SSD

S.M.A.R.T

HDD

NEW QUESTION 130
A technician is unable to connect to a network device via SSH_ Which of the following cables should the technician use as an alternative connection method with a laptop?

Serial

HDMI

Parallel

Lightning

Explanation
The correct answer is A. Serial.
A serial cable is a type of cable that can be used to connect a laptop to a network device via a serial port. A serial port is a physical interface that allows data transmission between devices using serial communication, which is a method of sending data one bit at a time over a single wire. Serial ports are often used for console access to network devices, such as routers, switches, firewalls, or servers, when other methods of connection, such as SSH (Secure Shell), are not available or not working.
SSH is a protocol that allows secure and encrypted remote login and command execution over a network. SSH uses public key cryptography to authenticate the client and the server, and to encrypt the data exchanged between them. SSH can be accessed through different ports, depending on the configuration of the server and the client. The default port for SSH is 22, but it can be changed to any other port for security reasons.
HDMI (High-Definition Multimedia Interface) is a type of cable that can be used to transmit audio and video signals between devices, such as laptops, monitors, TVs, or projectors. HDMI cables support high-definition video and audio formats, and can also carry Ethernet and power signals. HDMI cables are not suitable for connecting to network devices via SSH, as they are designed for multimedia purposes.
Parallel cables are a type of cable that can be used to connect devices that use parallel communication, which is a method of sending data multiple bits at a time over multiple wires. Parallel cables are often used for connecting printers or scanners to computers, but they are not commonly used for network devices or SSH connections.
Lightning cables are a type of cable that can be used to connect Apple devices, such as iPhones, iPads, or iPods, to computers or chargers. Lightning cables support data transfer and power delivery, and can also be used with adapters to connect to other types of ports, such as USB or HDMI. Lightning cables are not compatible with network devices or SSH connections, as they are specific to Apple products.
Therefore, the only cable that can be used as an alternative connection method with a laptop when SSH is not working is a serial cable. Serial cables can provide console access to network devices and allow configuration and troubleshooting commands to be executed. For more information about SSH and its alternatives, you can refer to the following web search results: Alternatives to SSH, How To Configure Custom Connection Options for your SSH Client, Understanding the SSH Encryption and Connection Process, How to Use Public Key Authentication with SSH.

NEW QUESTION 131
A laptop has been returned for a screen repair. The owner insists the screen is broken, but occasionally a faded image is able to be seen in very bright settings on the desktop. Which of the following steps should the repair technician take FIRST?

Replace the graphics card.

Replace the screen, as the customer insists.

Recommend the usage of an external display instead.

Ensure the backlight is functioning as expected.

NEW QUESTION 132
A thermal punier that is used 10 print order buckets m a factory has been experiencing Issues following the failure of the alt conditioner during the summer. Each ticket has blank spots or is missing text. Which of the following would MOST likely solve these Issues?

Restore function to the air conditioner.

Clean the heating element.

Replace the paper rolls.

Install new toner.

NEW QUESTION 133
A field technician has been dispatched to a site with an internet outage. Upon arriving, the technician discovers that the POTS lines are not working as well. Which of the following technologies is the site MOST likely using?

Fiber

Cable

DSL

Satellite

NEW QUESTION 134
A technician recently installed a new printer that is being shared over the network via a 64-bit Windows Print Server Two users, who have computers with a legacy OS, are unable to print to this new printer. Which of the following should the technician do to resolve this issue?

Enable 32-bit drivers on the Print Server.

Enable Print Spooler and restart the computer.

Run Windows Update on the users’ computers_

Update the computers to a 64-bit driver.

Explanation
The correct answer is A. Enable 32-bit drivers on the Print Server.
A print server is a computer or device that manages the printing requests from multiple clients over a network.
A print server can share one or more printers with different types of clients, such as Windows, Mac, or Linux.
However, to ensure compatibility and functionality, the print server must have the appropriate drivers for each printer and each client1.
A driver is a software component that enables the communication and interaction between a device and an operating system. A driver must match the specifications and features of the device, as well as the architecture and version of the operating system. A driver that is incompatible with either the device or the operating system may cause errors, malfunctions, or performance issues2.
In this scenario, the technician installed a new printer that is being shared over the network via a 64-bit Windows Print Server. This means that the print server has a 64-bit operating system and a 64-bit driver for the printer. However, two users who have computers with a legacy OS (an older or outdated operating system) are unable to print to this new printer. This may be because their computers have a 32-bit operating system and require a 32-bit driver for the printer.
To resolve this issue, the technician should enable 32-bit drivers on the Print Server. This means that the technician should install and configure a 32-bit driver for the printer on the print server, in addition to the existing 64-bit driver. This way, the print server can support both 64-bit and 32-bit clients, and allow them to print to the same printer34.
To enable 32-bit drivers on a Windows Print Server, the technician can follow these steps4:
On the print server, open Control Panel and select Devices and Printers.
Right-click on the printer that needs a 32-bit driver and select Printer Properties.
Click on the Sharing tab and check the box that says Share this printer.
Click on Additional Drivers and check the box that says x86 (for 32-bit).
Click OK and follow the instructions to install and configure the 32-bit driver.
For more information about print servers, drivers, and compatibility issues, you can refer to the following web search results: What is a Print Server?, What is a Device Driver?, How to Install Additional Drivers for Shared Printers, How to Enable 32-Bit Drivers on Windows Server.

NEW QUESTION 135
A user on a SOHO network is unable to watch online videos, even at 240 pixels. The technician runs ipconfig from the user’s computer and records the following:

The technician then connects a test laptop to the router via the user’s Cat 5 cable and records the following information:

Which of the following is MOST likely causing the user’s issue?

Incorrect IP address

Faulty NIC

Misconfigured default gateway

Bad network cable

NEW QUESTION 136
A university student was able to boot from a live Linux CD on a computer in a shared space on campus.
Which of the following will BEST prevent this type of action from occurring in the future?

Require TPM security features.

Set a boot password.

Disable all media options.

Enable secure boot.

NEW QUESTION 137
A technician is replacing the motherboard of a workstation for a user who runs multiple large applications at the same time. Which of the following motherboard specifications would provide the most significant improvement in performance?

Number of DIMM slots

Number of HDMI ports

Number of PCI slots

Number of USB ports

NEW QUESTION 138
A technician is designing a new laptop for a local construction company. Company employees will move the laptop around frequently and are likely to drop the laptop while working. Which of the following drives should the technician install to mitigate for potential damage?

S.M.A.R.T

SCSI

RAID

Solid-state

NEW QUESTION 139
A user reports intermittent connectivity. The technician checks the network logs and sees the following output:
Interface 0/1 Status Up
Interface 0/1 Status Down
Interface 0/1 Status Up 13:03:20
Interface 0/1 Status Down 13:04:10
Switch elected as Root bridge
Interface 0/1 Status Up 13:05:40
Which of the following is the most likely reason for this issue?

External interference

High latency

Jitter

Port flapping

NEW QUESTION 140
A user brings an older laptop to the help desk and reports issues with the keyboard. Upon inspection, the technician does not see any external damage but notices that many keystrokes da not register in a word processor. The laptop works fine when the technician tests it with an external keyboard. Which of the following actions would MOST likely resolve the issue?

Disable the sticky keys feature.

Clean the keyboard.

Reset the BIOS settings to default.

Charge the laptop.

NEW QUESTION 141
A user creates a support ticket to report a conference room projector that does not work. The user says that even though the provided cables are being used, the projector screen shows the following error message:
No signal input
Which of the following describes the FIRST action that should be taken?

Verify that the projector is turned on.

Verify that the user is using an approved OS.

Replace the projector bulb.

Check the video cable and replace it if necessary.