Latest NSE6_FWF-6.4 Pass Guaranteed Exam Dumps Certification Sample Questions [Q10-Q34]

5/5 - (1 vote)

Latest NSE6_FWF-6.4 Pass Guaranteed Exam Dumps Certification Sample Questions

New NSE6_FWF-6.4 Test Materials & Valid NSE6_FWF-6.4 Test Engine

NEW QUESTION 10
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)

Social networks authentication

Software security token authentication

Short message service authentication

Hardware security token authentication

This information along with the social network authentication logins with Facebook, Google, Instagram, LinkedIn, or FortiPresence using your WiFi.
Captive Portal configurations for social media logins and internet access. You can add and manage sites using the integrated Google maps and manoeuvre your hardware infrastructure easily.

NEW QUESTION 11
Where in the controller interface can you find a wireless client’s upstream and downstream link rates?

On the AP CLI, using the cw_diag ksta command

On the controller CLI, using the diag wireless-controller wlac -d sta command

On the AP CLI, using the cw_diag -d sta command

On the controller CLI, using the WiFi Client monitor

NEW QUESTION 12
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

DARRP measurements can be scheduled to occur at specific times.

DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

According to Fortinet training: “When using DARRP, the AP selects the best channel available to use based on the scan results of BSSID/receive signal strength (RSSI) to AC” and “To set the running time for DARRP optimization, use the following CLI command within the wireless controller setting: set darrp-optimize {integer}. Note that DARRP doesn’t do continuous spectrum analysis…”

NEW QUESTION 13
Which factor is the best indicator of wireless client connection quality?

Downstream link rate, the connection rate for the AP to the client

The receive signal strength (RSS) of the client at the AP

Upstream link rate, the connection rate for the client to the AP

The channel utilization of the channel the client is using

SSI, or “Received Signal Strength Indicator,” is a measurement of how well your device can hear a signal from an access point or router. It’s a value that is useful for determining if you have enough signal to get a good wireless connection.

NEW QUESTION 14
Where in the controller interface can you find a wireless client’s upstream and downstream link rates?

On the AP CLI, using the cw_diag ksta command

On the controller CLI, using the diag wireless-controller wlac -d sta command

On the AP CLI, using the cw_diag -d sta command

On the controller CLI, using the WiFi Client monitor

NEW QUESTION 15
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?

SQL services must be running

Two wireless APs must be sending data

DTLS encryption on wireless traffic must be turned off

Wireless network security must be set to open

NEW QUESTION 16
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?

Security Fabric

SSH

HTTPS

FortiTelemetry

NEW QUESTION 17
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)

Gathering details about on site visitors

Predicting the number of guest users visiting on-site

Comparing current data with historical records

Reporting potential threats by guests on site

NEW QUESTION 18
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)

When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.

When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.

When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

NEW QUESTION 19
Which statement describes FortiPresence location map functionality?

Provides real-time insight into user movements

Provides real-time insight into user online activity

Provides real-time insight into user purchase activity

Provides real-time insight into user usage stats

NEW QUESTION 20
Refer to the exhibits.
Exhibit A

Exhibit B

The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?

WPA2 Enterprise

WPA3 Enterprise

WPA2 Personal and radius MAC filtering

Open, with radius MAC filtering

Best security option is WPA2-AES.

NEW QUESTION 21
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?

Enable Locate WiFi clients when not connected in the relevant AP profiles.

Enable Monitor channel utilization on the relevant AP profiles.

Ensure that all allowed channels are enabled for the AP radios.

Enable Radio resource provisioning on the relevant AP profiles.

The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.

NEW QUESTION 22
Refer to the exhibits.
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be “Authors”

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

NEW QUESTION 23
Which two phases are part of the process to plan a wireless design project? (Choose two.)

Project information phase

Hardware selection phase

Site survey phase

Installation phase

Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design

NEW QUESTION 24
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)

An X.509 certificate to authenticate the client

An X.509 to authenticate the authentication server

A WPA2 or WPA3 personal wireless network

A WPA2 or WPA3 Enterprise wireless network

NEW QUESTION 25
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)

Control channels

Security channels

FortLink channels

Data channels

The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.

NEW QUESTION 26
Which two phases are part of the process to plan a wireless design project? (Choose two.)

Project information phase

Hardware selection phase

Site survey phase

Installation phase

NEW QUESTION 27
What type of design model does FortiPlanner use in wireless design project?

Architectural model

Predictive model

Analytical model

Integration model

FortiPlanner will look familiar to anyone who has used architectural or home design software.

NEW QUESTION 28
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?

DHCP

Static

Broadcast

Multicast

Loading …

NSE6_FWF-6.4 Sample with Accurate & Updated Questions: https://www.actualtests4sure.com/NSE6_FWF-6.4-test-questions.html

[Jan-2023] The Best NSE 6 Network Security Specialist Study Guide for the NSE6_FWF-6.4 Exam [Q14-Q30]

[Feb-2023] Updated NSE 5 Network Security Analyst NSE5_EDR-5.0 Exam Questions BUNDLE PACK [Q18-Q32]

Actual Test Materials

Latest NSE6_FWF-6.4 Pass Guaranteed Exam Dumps Certification Sample Questions [Q10-Q34]

Byadmin

By admin

Related Post

[Q12-Q30] Full FCSS_NST_SE-7.6 Practice Test and 103 unique questions with explanations waiting just for you!

100% Reliable FCP_ZCS_AD-7.4 Exam Dumps Test Pdf Exam Material [Q15-Q33]

Prepare FCSS_EFW_AD-7.4 Question Answers Free Update With 100% Exam Passing Guarantee [Q18-Q41]

Leave a Reply Cancel reply

you might like

[Sep 23, 2026] JavaScript-Developer-I Exam Dumps – Try Best JavaScript-Developer-I Exam Questions – Actualtests4sure [Q18-Q32]

Ace API API-510 Certification with Actual Questions Sep 22, 2026 Updated [Q52-Q66]

[Sep-2026] ARA-C01 Free Sample Questions to Practice One Year Update [Q99-Q115]

New EAEP_2025 Test Materials & Valid EAEP_2025 Test Engine [Q153-Q174]

Actual Test Materials